Skip to main content
Log in
Schneider Electric ATV630U15N4US — AC Drive (VFD) 480V

Schneider ATV630U15N4US VSD, 1.5 kW ND, STO SIL 3

MPNATV630U15N4US
Active

Schneider Altivar Process ATV630, standard version variable speed drive, 380-480 V, 1.5 kW normal duty, continuous output 4 A, integrated STO SIL 3 safety function, EMC filter integrated C2/C3.

$1,586.22Ref. price · indicative, final on quote
Schneider Electric ATV630U15N4US datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

ATV630U15N4US — Identification
ParameterValue
Product typeVariable speed drive
Device short nameATV630
Product range / familyAltivar Process ATV600
ATV630U15N4US — Power & Output
ParameterValue
Motor power (kW)1.5 kW normal duty) 0.75 kW heavy duty)
Continuous output current4 A 4 kHz normal duty 2.2 A 4 kHz heavy duty
ATV630U15N4US — Input / Supply
ParameterValue
Rated supply voltage range380...480 V
Input line current3 A 380 V normal duty) 2.6 A 480 V normal duty) 1.7 A 380 V heavy duty) 1.5 A 480 V heavy duty)
ATV630U15N4US — Control & Performance
ParameterValue
Output frequency range0.1...500 Hz
ATV630U15N4US — Protection & EMC
ParameterValue
Integrated EMC filter classIntegrated 164.04 ft (50 m) IEC 61800-3 category C2 Integrated 492.1 ft (150 m) IEC 61800-3 category C3
EMC immunity testsElectrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
ATV630U15N4US — Mechanical & Cooling
ParameterValue
Degree of protection (IP)UL type 1 UL 508C
IP degree of protectionIP21IEC 61800-5-1 IP21IEC 60529
Acoustic noise level54.5 dB
Cooling methodForced convection
ATV630U15N4US — Environmental
ParameterValue
Operating ambient temperature5...122 °F (-15...50 °C) (without derating) 122...140 °F (50...60 °C) (with derating factor)
Operating altitude1000...4800 m with current derating 1 % per 100 m
Relative humidity5...95 % without condensation IEC 60068-2-3
Storage / transport temperature-40...158 °F (-40...70 °C)
Pollution degree2
Vibration resistance1.5 mm peak to peak (f= 2...13 Hz) conforming to IEC 60068-2-6 1 gn (f= 13...200 Hz) conforming to IEC 60068-2-6
ATV630U15N4US — Approvals
ParameterValue
Certifications & markingCE
Standards complianceUL 508C IEC 61800-3 IEC 61800-3 environment 1 category C2 EN/IEC 61800-3 environment 2 category C3 IEC 61800-5-1 IEC 61000-3-12 IEC 60721-3 IEC 61508 IEC 13849-1
ATV630U15N4US — Communication
ParameterValue
Communication protocolsModbus TCP Ethernet Modbus serial

Product details

Drive at a glance

This ATV630U15N4US is a 1.5 kW normal-duty drive from Schneider's Altivar Process line, built for pumps, fans, and conveyor drives — the kind of gear that sees long running hours out here in the grease. Rated 380 to 480 V three-phase, it delivers 4 A continuous in normal duty (2.2 A in heavy duty), handling motors from 0.75 kW heavy up to 1.5 kW normal.

Mounting and cooling

Wall-mount it vertical within 10 degrees of plumb, and give it room to breathe — forced-convection fan moves 38 cubic meters of air per hour. Pollution degree 2 environment keeps the innards clean; if your panel gets dusty, plan a filter intake. Vibration rating 1.5 mm peak-to-peak up to 13 Hz, then 1 g to 200 Hz, so it'll hang on a modestly stiff panel without shaking loose. IP21 enclosure is splash-proof enough for most process halls but not wash-down. Keep it out of direct hose spray and you're fine.

Safety and communication

Built-in STO (Safe Torque Off) SIL 3 means you can drop the drive safely without pulling the mains contactor — a nice piece of mind for a line-down swap. That's a solid safety function for a drive this size. It ships with embedded Modbus TCP and Modbus serial. Need something else? Slot A takes option cards for Profibus DP, PROFINET, DeviceNet, Modbus TCP/EtherNet/IP, CANopen, Ethernet Powerlink, or BACnet. Also room for I/O or relay extension in Slot A or B. You get eight digital inputs, including two programmable as 0-30 kHz pulse inputs.

Compliance paperwork

CE marked, UL 508C listed, and carries the full IEC 61800-3 EMC categories: C2 up to 50 m of motor cable, C3 up to 150 m. It's also TAA/BAA compliant for US federal projects. If your QC needs a declaration pack, the usual Schneider docs (RoHS, REACH, UL) are available with the order.

Frequently asked questions

What is the closest pin-compatible alternative?

This is the standard version; it's still active so no direct replacement needed. A different frame size or power rating would not be a drop-in swap.

What compliance markings does this drive carry?

It's CE marked, UL 508C listed, and complies with IEC 61800-3 (EMC categories C2/C3), IEC 61800-5-1, IEC 61000-3-12, IEC 60721-3, IEC 61508, and IEC 13849-1. RoHS and REACH declarations are typically available from the manufacturer.

What are the key electrical ratings?

Supply voltage 380–480 V three-phase, normal duty motor power 1.5 kW (2 hp), heavy duty 0.75 kW (1 hp). Continuous output 4 A normal duty, 2.2 A heavy duty at 4 kHz switching. Line current 3 A at 380 V normal duty, 1.5 A at 480 V heavy duty.

MPN
ATV630U15N4US