Skip to main content
Log in
Schneider Electric ATV630U75N4Z — AC Drive (VFD) 480V

Schneider Electric ATV630U75N4Z Altivar Process drive, 7.5 k

MPNATV630U75N4Z
Active

Schneider Electric Altivar Process ATV630, ATV630U75N4Z, variable speed drive, 7.5 kW normal duty / 5.5 kW heavy duty, 380...480 V, 16.5 A continuous output, IP20, cabinet mount.

Schneider Electric ATV630U75N4Z datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

ATV630U75N4Z — Identification
ParameterValue
Product typeVariable speed drive
Device short nameATV630
Product range / familyAltivar Process ATV600
ATV630U75N4Z — Power & Output
ParameterValue
Motor power (kW)7.5 kW normal duty) 5.5 kW heavy duty)
Continuous output current16.5 A 4 kHz normal duty 12.7 A 4 kHz heavy duty
ATV630U75N4Z — Input / Supply
ParameterValue
Rated supply voltage range380...480 V
Input line current13.8 A 380 V normal duty) 11.9 A 480 V normal duty) 10.5 A 380 V heavy duty) 9.2 A 480 V heavy duty)
ATV630U75N4Z — Control & Performance
ParameterValue
Output frequency range0.1...500 Hz
ATV630U75N4Z — Protection & EMC
ParameterValue
Integrated EMC filter classIntegrated 32.8 ft (10 m) IEC 61800-3 category C2 Integrated 164.04 ft (50 m) IEC 61800-3 category C3 With EMC plate option
EMC immunity testsElectrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
ATV630U75N4Z — Mechanical & Cooling
ParameterValue
IP degree of protectionIP20IEC 61800-5-1 IP20IEC 60529
Acoustic noise level56 dB
Cooling methodForced convection
Assembly / installation styleWith heat sink
ATV630U75N4Z — Environmental
ParameterValue
Operating ambient temperature5...122 °F (-15...50 °C) (without derating) 122...140 °F (50...60 °C) (with derating factor)
Operating altitude1000...4800 m with current derating 1 % per 100 m
Relative humidity5...95 % without condensation IEC 60068-2-3
Storage / transport temperature-40...158 °F (-40...70 °C)
Pollution degree2
Vibration resistance1.5 mm peak to peak (f= 2...13 Hz) conforming to IEC 60068-2-6 1 gn (f= 13...200 Hz) conforming to IEC 60068-2-6
ATV630U75N4Z — Approvals
ParameterValue
Certifications & markingCE
Standards complianceUL 508C IEC 61800-3 IEC 61800-3 environment 1 category C2 EN/IEC 61800-3 environment 2 category C3 IEC 61800-5-1 IEC 61000-3-12 IEC 60721-3 IEC 61508 IEC 13849-1
ATV630U75N4Z — Communication
ParameterValue
Communication protocolsEthernet Modbus serial Modbus TCP

Product details

The ATV630U75N4Z is a 7.5 kW normal-duty / 5.5 kW heavy-duty variable speed drive from the Altivar Process ATV600 range, sized for 380...480 V three-phase supply. Continuous output current is 16.5 A at 4 kHz for normal duty, 12.7 A at 4 kHz for heavy duty. The drive includes an integrated EMC filter rated for IEC 61800-3 category C2 at 10 m cable and category C3 at 50 m cable. Safe torque off (STO) is built in at SIL 3.

The 7.5 kW normal-duty rating matches a standard 10 hp induction motor on a pump or fan curve; the 5.5 kW heavy-duty rating covers constant-torque loads like conveyors or extruders. The 16.5 A continuous output is the figure to compare against motor full-load amps. Output frequency spans 0.1 to 500 Hz, so it handles high-speed spindle applications as well as standard 50/60 Hz motors. The drive accepts 8 discrete inputs, one of which can be configured as a pulse input up to 30 kHz for encoder feedback.

Integration constraints

Cabinet mount with heat sink; forced convection cooling requires 103 m³/h of free air. Operating position vertical ±10°. Ambient relative humidity 5...95% non-condensing. Altitude derating: 1% per 100 m above 1000 m. Slot A accepts fieldbus option cards (Profibus DP V1, PROFINET, DeviceNet, Modbus TCP/EtherNet/IP, CANopen, Ethernet Powerlink, BACnet MS/TP). Slot A/B also accept I/O extension and relay output modules. The drive includes an adjustable PID regulator for process control loops.

Frequently asked questions

What compliance documentation is available for this drive?

The drive carries CE marking and complies with UL 508C, IEC 61800-3, IEC 61800-5-1, IEC 61508, and IEC 13849-1. EMC immunity meets level 3 or 4 across IEC 61000-4-2 through 4-6.

What is the closest alternative in the same family?

The ATV630U75N4Z is the standard version. A variant with a different EMC filter or coating may exist, but the base ratings (7.5 kW normal, 16.5 A output, 380-480 V) are identical across the standard build. No pin-compatible drop-in exists outside the Altivar Process family.

What fieldbus options fit this drive?

Slot A accepts Profibus DP V1, PROFINET, DeviceNet, Modbus TCP/EtherNet/IP, CANopen (RJ45, SUB-D 9, or screw terminals), Ethernet Powerlink, and BACnet MS/TP modules. Slot A/B also accept I/O extension and relay output modules.

MPN
ATV630U75N4Z