Skip to main content
Log in
Schneider Electric ATV6A0C20N6 — AC Drives (VFD)

Schneider ATV6A0C20N6 ATV600 Process Drive, 132 kW / 110 kW

MPNATV6A0C20N6
Active

Schneider Electric Altivar Process ATV600, modular drive, ATV6A0C20N6, 132 kW at 500 V normal duty / 110 kW heavy duty, integrated EMC filter C3, forced convection cooling, STO SIL 3.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

ATV6A0C20N6 — Identification
ParameterValue
Product rangeAltivar Process ATV600
Product / component typeVariable speed drive
ATV6A0C20N6 — Power & Current
ParameterValue
Continuous output current215.0 A at 2.5 kHz normal duty 175.0 A at 2.5 kHz heavy duty
ATV6A0C20N6 — Control & Communication
ParameterValue
Switching frequency2.5 kHz
Synchronous motor control profilePermanent magnet motor Synchronous reluctance motor
Communication protocols / portsEthernet Modbus serial Modbus TCP
Acceleration / deceleration rampsS, U or customized Linear adjustable separately from 0.01...9999 s
Product destinationSynchronous motors Asynchronous motors
ATV6A0C20N6 — Protection & Environmental
ParameterValue
Protection functionsThermal protection motor Safe torque off motor Motor phase break motor Thermal protection drive Safe torque off drive Overheating drive Overcurrent between output phases and earth drive Overload of output voltage drive Short-circuit protection drive Motor phase break drive Overvoltages on the DC bus drive Line supply overvoltage drive Line supply undervoltage drive Line supply phase loss drive Overspeed drive Break on the control circuit drive
Degree of protection (IP)UL type 1 conforming to UL 61800-5-1 (cabinet integration) UL type 12 conforming to UL 61800-5-1 (cabinet integration)
IP degree of protectionIP00 for IP21 or IP54 cabinet integration)IEC 61800-5-1 IP00 for IP21 or IP54 cabinet integration)IEC 60529
ATV6A0C20N6 — Electrical
ParameterValue
Supply frequency50...60 Hz - 5...5 %
Network number of phases3 phases

Product details

Building the BOM around this drive

Cabinet mount only — no through-panel gland plate kit in the box. The kit includes one control unit, one power module (200 kW size), mechanical mounting hardware, and a set of fuses. Line-side connection uses M10 screw bars; control uses removable screw terminals 0.5–1.5 mm² (AWG 20–16). Cooling is forced convection; ambient derating above 40 °C (not stated explicitly but typical for this range). Operating altitude up to 1000 m without derating; above that, reduce current per the drive's thermal curve. Pollution degree 2 per IEC 61800-5-1, so standard office/light industrial environment acceptable. Safe torque off (STO) certified to SIL 3 — no need for an external safety relay if the control system provides a dual-channel STO signal. Motor protection includes thermal, phase break, short-circuit, and ground fault detection. Communication slot A accepts fieldbus modules for PROFIBUS DP V1, PROFINET, DeviceNet, Modbus TCP/EtherNet/IP, or CANopen. The base drive includes Modbus serial (RS-485, 2-wire, RTU) and Modbus TCP (Ethernet). If the control network is one of those, no extra module needed.

Frequently asked questions

What is the CE marking on this drive?

The ATV6A0C20N6 carries CE marking, confirming compliance with applicable EU directives.

What does 'Modular version' mean?

The drive is supplied as separate power module and control unit, plus mounting hardware and line fuses. The control unit and power module must be assembled together — not a single-block unit.

What compliance documentation is available for this part?

The drive complies with IEC 61800-3, IEC 61800-5-1, IEC 61000-3-12, IEC 60721-3, IEC 61508, and IEC 13849-1. It is CE marked and includes integrated EMC filter C3.

MPN
ATV6A0C20N6