Hardware for a 630 kW machine. The ATV6A0C63Q4 ships as a kit: one control unit, four 160 kW power modules, mounting hardware, and a set of fuses. You're looking at a cabinet-mount drive rated 733 kVA normal duty at 400 V, drawing 1058 A line current. The integrated EMC filter meets IEC 61800-3 Category C3 with up to 300 m of motor cable—saves you an external box. On the control side, you get six programmable digital inputs (two can be configured as pulse inputs up to 30 kHz), three analog inputs, two analog outputs, and three relay outputs. The embedded Modbus TCP port runs at 10/100 Mbit/s, and slot A accepts a Profibus, PROFINET, DeviceNet, CANopen, or Ethernet/IP module.
Cabinet mount, forced-air cooling. Pollution degree 2 environment. Operate between 1000 m and 4800 m with a 1 % derating per 100 m above 1000 m. Relative humidity 5…95 % non-condensing. Shock resistance 7 gn for 11 ms. The supply frequency must be 50/60 Hz ±5 %. All digital inputs take 24 V DC nominal (19…30 V), and the internal supply for STO and digital inputs is rated <200 mA with overload protection. For potentiometer wipers, there's a 10.5 V DC reference supply. Watch the line current: 1058 A at 400 V ND is not a small feeder—make sure your upstream protection and conductor sizing match.