Skip to main content
Schneider Electric ATV6A0C71T4

Schneider ATV6A0C71T4 ATV600 Drive, 1000 hp, 480 V

MPN ATV6A0C71T4
Active

Schneider Altivar Process ATV600, modular version, 1000 hp at 480 V normal duty, 1044 A line current, integrated EMC filter C3, STO SIL 3.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ATV6A0C71T4 specifications
ParameterValue
Main product or component typeVariable speed drive
Current1044.0 A 480 V normal duty) 846.0 A 480 V heavy duty)
Horsepower1000.0 hp at 480 V normal duty 800.0 hp at 480 V heavy duty
Frequency50...60 Hz - 5...5 %
Temp storage max70 °C
Temp storage min-40 °C
Temp operating max60 °C
Temp operating min1.1 °C
Storage temperature-40...158 °F (-40...70 °C)
Pollution degreePollution degree 2
Data format8 bits, configurable odd, even or no parity Modbus serial
Operating temperature14...104 °F (-10...40 °C) without derating 104...122 °F (40...50 °C) with derating factor

Product details

The ATV6A0C71T4: This is the Schneider Altivar Process ATV600 drive in modular version, sized for 1000 hp at 480 V in normal duty (800 hp heavy duty). It comes as a kit: control unit, power module (160 kW base), mechanical mounting hardware, power connection set with fuses, and front cover.

Line current is 1044 A normal duty at 480 V, 846 A heavy duty. That sets your upstream breaker and cable minimums. Apparent power runs 868 kVA normal duty, 703 kVA heavy duty. Total harmonic distortion of input current (THDI) is under 48% at full load per IEC 61000-3-12 — the integrated EMC filter handles cable runs up to 300 m and meets category C3 of IEC 61800-3. The STO supply is 24 V DC, 21-27 V, kept separate from the digital input supply.

Supply and I/O details

Digital inputs run off an external 24 V DC supply (19-30 V). Internal supplies: 10.5 V DC ±5% for the reference potentiometer (1-10 kΩ), and a separate 24 V DC rail for digital inputs and STO (21-27 V), with overload and short-circuit protection at <200 mA. Three analog inputs (voltage 0-10 V or current 0/4-20 mA, 12-bit) with ±0.6% accuracy over 60°C and ±0.15% linearity. Two analog outputs ±1% accuracy. Six discrete inputs, of which DI5 and DI6 can be configured as pulse inputs up to 30 kHz. Communication slots: Slot A accepts Profibus DP V1, PROFINET, DeviceNet, Modbus TCP/EtherNet/IP, CANopen (RJ45, SUB-D 9, or screw terminals). Built-in Modbus serial and Ethernet/Modbus TCP at 10/100 Mbit/s. Relay outputs R1 (NO/NC fault), R2, R3 (NO sequence), 100000 cycles each, refresh 5 ms.

Cabinet mount, forced convection cooling. Operating altitude up to 1000 m without derating, then 1% per 100 m up to 4800 m. Pollution degree 2, shock resistance 7 gn for 11 ms, relative humidity 5-95% non-condensing. Noise level 74 dB per 86/188/EEC. Output voltage is ≤ supply voltage.

MPN
ATV6A0C71T4