Skip to main content
Log in
Schneider Electric ATV6A0M10Q4 — AC Drive (VFD) 480V

Schneider ATV6A0M10Q4 Altivar Process ATV600, 1000 kW normal

MPNATV6A0M10Q4
Active

Schneider Electric Altivar Process ATV600, modular variable speed drive, ATV6A0M10Q4, 1000 kW at 400 V normal duty, 800 kW heavy duty, integrated EMC filter C3, STO SIL 3.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

ATV6A0M10Q4 — Identification
ParameterValue
Product typeVariable speed drive
Device short nameATV6A0
Product range / familyAltivar Process ATV600
ATV6A0M10Q4 — Power & Output
ParameterValue
Motor power (kW)1000.0 kW at 400 V normal duty 800.0 kW at 400 V heavy duty
Continuous output current1770.0 A at 2.5 kHz normal duty 1420.0 A at 2.5 kHz heavy duty
Max. transient current1947 A during 60 s (normal duty) 2130 A during 60 s (heavy duty)
Apparent power1175 kVA at 400 V normal duty 950 kVA at 400 V heavy duty
ATV6A0M10Q4 — Input / Supply
ParameterValue
Rated supply voltage range400 V - 15...10 %
Input line current1542.0 A at 400 V (normal duty) 1246.0 A at 400 V (heavy duty)
Network number of phases3 phases
Internal/auxiliary suppliesExternal supply for digital inputs: 24 V DC (19...30 V), Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, Internal supply for digital inputs and STO: 24 V DC (21...27 V), <200 mA, protection type: overload and short-circuit protection
ATV6A0M10Q4 — Control & Performance
ParameterValue
Output frequency range0...500 Hz
Asynchronous motor control modesConstant torque standard Variable torque standard Optimized torque mode
Synchronous motor control modesPermanent magnet motor Synchronous reluctance motor
ATV6A0M10Q4 — Protection & EMC
ParameterValue
Integrated EMC filter classIntegrated with 300 m conforming to IEC 61800-3 category C3
Protection functionsThermal protection: motor Safe torque off: motor Motor phase break: motor Thermal protection: drive Safe torque off: drive Overheating: drive Overcurrent between output phases and earth: drive Overload of output voltage: drive Short-circuit protection: drive Motor phase break: drive Overvoltages on the DC bus: drive Line supply overvoltage: drive Line supply undervoltage: drive Line supply phase loss: drive Overspeed: drive Break on the control circuit: drive
EMC immunity testsElectrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
Prospective short-circuit current (Isc)50 kA
ATV6A0M10Q4 — Mechanical & Cooling
ParameterValue
IP degree of protectionIP00 (for IP21 or IP54 cabinet integration) conforming to IEC 61800-5-1 IP00 (for IP21 or IP54 cabinet integration) conforming to IEC 60529
Acoustic noise level75 dB conforming to 86/188/EEC
Cooling methodForced convection
ATV6A0M10Q4 — Environmental
ParameterValue
Operating ambient temperature-10...40 °C without derating 40...50 °C with derating factor
Operating altitude0...4800 m with current derating above 1000m
Relative humidity5...95 % without condensation conforming to IEC 60068-2-3
Storage / transport temperature-40...70 °C
Pollution degree2 conforming to IEC 61800-5-1
Vibration resistance1.5 mm peak to peak (f= 2...13 Hz) conforming to IEC 60068-2-6 0.5 gn (f= 13...200 Hz) conforming to IEC 60068-2-6
ATV6A0M10Q4 — Approvals
ParameterValue
Certifications & markingCE
Standards complianceIEC 61800-3 IEC 61800-5-1 IEC 61000-3-12 IEC 60721-3 IEC 61508 IEC 13849-1
ATV6A0M10Q4 — Communication
ParameterValue
Communication protocolsEthernet Modbus serial Modbus TCP

Product details

The Schneider ATV6A0M10Q4 is an Altivar Process ATV600 drive rated for 1000 kW at 400 V normal duty and 800 kW heavy duty. It's a modular cabinet-mount unit with an integrated EMC filter compliant to IEC 61800-3 category C3 for 300 m cable runs, and STO SIL 3 safety function on board. The lifecycle status is current, so this is a live BOM line, not a last-time-buy scavenge.

Line current at 400 V is 1542 A normal duty, 1246 A heavy duty — this drives your cable sizing and upstream breaker coordination. Apparent power works out to 1175 kVA normal, 950 kVA heavy, so the drive's input transformer or generator must be sized accordingly. The integrated EMC filter is rated for 300 m of motor cable under category C3 (industrial environment, not residential). If your installation requires longer cable runs or a lower conducted emission limit (C2), you'll need an external output filter. The drive also carries STO SIL 3 per IEC 61508 / IEC 13849-1, which means it can be wired directly into a safety circuit without a separate safety relay for the torque-off function.

Supply and control wiring

Digital inputs need an external 24 V DC supply (19...30 V). The drive provides an internal 10.5 V DC reference for a 1 to 10 kOhm potentiometer, and a separate 24 V DC supply (21...27 V) for digital inputs and STO, rated <200 mA with overload and short-circuit protection. That means you can power the control logic from the drive itself for small panels, but for larger systems with many I/O points, a dedicated 24 V DC supply is still recommended to stay within the 200 mA budget. Analog inputs (AI1, AI2, AI3) are software-configurable for voltage (0...10 V DC, 30 kOhm) or current (0...20 mA / 4...20 mA, 250 Ohm), 12-bit resolution. Accuracy is ±0.6 % over a 60 °C temperature variation.

Communication and expansion

Embedded Modbus serial (2-wire RS-485, RTU frame) and Modbus TCP (Ethernet, 10/100 Mbit/s, half/full duplex with autonegotiation) are standard. Slot A accepts fieldbus option modules: Profibus DP V1, PROFINET, DeviceNet, Modbus TCP/EtherNet/IP, or CANopen (RJ45, SUB-D 9, or screw terminals). Slots A and B also accept digital/analog I/O extension or output relay extension modules. If you need a second fieldbus or extra I/O, this drive can take it without a separate gateway.

Frequently asked questions

What are the motor power ratings for this drive?

1000 kW at 400 V normal duty and 800 kW at 400 V heavy duty.

What safety function does the ATV6A0M10Q4 support?

Safe Torque Off (STO) rated SIL 3 per IEC 61508 and IEC 13849-1.

What EMC filter is integrated?

An integrated EMC filter compliant to IEC 61800-3 category C3, rated for 300 m of motor cable.

What supply voltages does the control section need?

Digital inputs require an external 24 V DC (19...30 V). The drive provides an internal 10.5 V DC reference for a potentiometer and a separate 24 V DC (21...27 V) supply for digital inputs and STO, rated <200 mA with overload and short-circuit protection.

MPN
ATV6A0M10Q4