Skip to main content
Schneider Electric ATV6A0M10T4

Schneider ATV6A0M10T4 Altivar Process 1000 kW Drive

MPN ATV6A0M10T4
Active

Schneider Altivar Process ATV600, modular drive, ATV6A0M10T4, 1000 kW normal duty at 480 V, integrated EMC filter C3, STO SIL 3.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ATV6A0M10T4 specifications
ParameterValue
Main product or component typeVariable speed drive
Current1692.0 A 480 V normal duty) 1362.0 A 480 V heavy duty)
Horsepower1400.0 hp at 480 V normal duty 1100.0 hp at 480 V heavy duty
Frequency50...60 Hz - 5...5 %
Temp storage max70 °C
Temp storage min-40 °C
Temp operating max60 °C
Temp operating min1.1 °C
Storage temperature-40...158 °F (-40...70 °C)
Pollution degreePollution degree 2
Data format8 bits, configurable odd, even or no parity Modbus serial
Operating temperature14...104 °F (-10...40 °C) without derating 104...122 °F (40...50 °C) with derating factor

Product details

The Schneider ATV6A0M10T4 is an Altivar Process ATV600 modular drive rated for 1000 kW normal duty at 480 V (800 kW heavy duty), with integrated EMC filter compliant to IEC 61800-3 category C3 and safe torque off (STO) certified to SIL 3 per IEC 61508. It draws 1692 A line current at 480 V in normal duty, 1362 A in heavy duty, with a maximum THDI under 48% at full load.

Safety and Compliance

Functional safety is declared at SIL 3 for the STO function, documented through the listed standards IEC 61508 and IEC 13849-1. The drive also meets IEC 61800-5-1 for electrical safety and UL 61800-5-1 for North American installations. The integrated EMC filter is rated for 300 m cable (984.3 ft) and complies with IEC 61800-3 category C3, meaning it is designed for industrial power networks where the supply impedance is low. CE marking is present on the drive, and the pollution degree is 2 per IEC 61800-5-1, which covers typical industrial environments.

Supply and I/O Configuration

The control section provides three internal supplies: 24 V DC for digital inputs (19...30 V), 10.5 V DC for a reference potentiometer (1 to 10 kOhm), and a dedicated 24 V DC rail for digital inputs and STO (21...27 V), each with under 200 mA overload and short-circuit protection. Six discrete inputs (DI1–DI6) are programmable; DI5 and DI6 can also serve as pulse inputs up to 30 kHz. Three analog inputs (AI1–AI3) accept voltage 0–10 V DC or current 0–20/4–20 mA with 12-bit resolution. Two analog outputs (AO1, AO2) are available.

Fieldbus and Communication

Slot A accepts optional communication modules for Profibus DP V1, PROFINET, DeviceNet, Modbus TCP/EtherNet/IP, CANopen daisy chain RJ45, CANopen SUB-D 9, or CANopen screw terminals. Slot A and slot B can also accept digital/analog I/O extension modules or output relay extension modules. Embedded Ethernet supports Modbus TCP at 10/100 Mbit/s with half-duplex, full-duplex, or autonegotiation. A serial RS-485 port runs Modbus RTU at 4.8, 9.6, 19.2, 38.4 kbit/s.

MPN
ATV6A0M10T4