Skip to main content
Log in
Schneider Electric ATV6B0C13Q6 — AC Drive (VFD) 600V

Schneider ATV6B0C13Q6 Altivar Process ATV600, 132 kW at 690

MPNATV6B0C13Q6
Active

Schneider Electric Altivar Process ATV600, modular version, ATV6B0C13Q6, 132 kW at 690 V normal duty, 110 kW heavy duty, integrated EMC filter C3.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

ATV6B0C13Q6 — Identification
ParameterValue
Product range / seriesAltivar Process ATV600
Device short name / model codeATV6B0
Product / component typeVariable speed drive
ATV6B0C13Q6 — Electrical (input)
ParameterValue
Rated supply voltage690 V - 10...10 %
Network phases3 phases
Supply frequency50...60 Hz - 5...5 %
Line (input) current122.0 A 690 V normal duty) 102.0 A 690 V heavy duty)
Prospective line short-circuit current (Isc)50 kA
EMC filterIntegrated 984.3 ft (300 m) IEC 61800-3 category C3
Max. input current THD (THDi)<5 % full load IEEE 519
ATV6B0C13Q6 — Output / Performance
ParameterValue
Apparent power146 kVA at 690 V normal duty 122 kVA at 690 V heavy duty
Continuous output current145.0 A at 2.5 kHz normal duty 125.0 A at 2.5 kHz heavy duty
Switching (PWM) frequency2...4.9 kHz adjustable with derating factor
ATV6B0C13Q6 — Communication
ParameterValue
Communication protocolsEthernet Modbus serial Modbus TCP
Address range1...247 Modbus serial
Data format8 bits, configurable odd, even or no parity Modbus serial
ATV6B0C13Q6 — Mechanical
ParameterValue
Mounting modeCabinet mount
Terminal / wiring connectionControl removable screw terminals 0.5...1.5 mm² AWG 20...AWG 16 Line side screw terminal Motor M10 x 2 bars
Product destination / compatibilitySynchronous motors Asynchronous motors
ATV6B0C13Q6 — Environmental
ParameterValue
Degree of protection (IEC, IP)UL type 1 conforming to UL 61800-5-1 (cabinet integration) UL type 12 conforming to UL 61800-5-1 (cabinet integration)
IP rating (with kit options)IP00 for IP21 or IP54 cabinet integration)IEC 61800-5-1 IP00 for IP21 or IP54 cabinet integration)IEC 60529
Operating ambient temperature14...104 °F (-10...40 °C) without derating 104...122 °F (40...50 °C) with derating factor
Storage temperature-40...158 °F (-40...70 °C)
Operating altitude (with derating)< 2000 m with current derating above 1000m
Relative humidity5...95 % without condensation IEC 60068-2-3
Pollution degree2 IEC 61800-5-1
Environmental resistance classesChemical pollution resistance class 3C3 IEC 60721-3-3 Dust pollution resistance class 3S3 IEC 60721-3-3 Humidity resistant class 3K3 IEC 60721-3-3
Vibration resistance1.5 mm peak to peak (f= 2...13 Hz) conforming to IEC 60068-2-6 0.5 gn (f= 13...200 Hz) conforming to IEC 60068-2-6
Shock resistance4 gn 11 ms IEC 60068-2-27
Acoustic noise level70 dB 86/188/EEC
ATV6B0C13Q6 — Approvals & Compliance
ParameterValue
StandardsIEC 61800-3 IEC 61800-5-1 IEC 61000-3-12 IEC 60721-3 IEC 61508 IEC 13849-1
Agency markings / approvalsCE

Product details

The Schneider ATV6B0C13Q6 is an Altivar Process ATV600 drive in the modular version, rated 132 kW at 690 V normal duty and 110 kW at 690 V heavy duty. It handles synchronous and asynchronous motors, with line current of 122 A normal duty, 102 A heavy duty at 690 V. The integrated EMC filter meets IEC 61800-3 category C3 for 300 m cable runs, and the drive carries STO (safe torque off) SIL 3.

The 132 kW normal-duty / 110 kW heavy-duty split is the key selection gate: normal duty covers constant-torque loads like conveyors; heavy duty applies to variable-torque pumps and fans where peak current is lower. The drive's apparent power is 146 kVA normal duty, 122 kVA heavy duty at 690 V. Switching frequency is adjustable from 2 to 4.9 kHz with derating — higher frequencies reduce motor noise but increase thermal load on the drive. Forced convection cooling means the drive needs clearance around the heatsink; cabinet integration requires UL type 1 or type 12 enclosure integration per UL 61800-5-1. Operating altitude is below 2000 m with current derating above 1000 m. The drive includes a full set of protection functions: thermal protection for drive and motor, safe torque off, overcurrent, short-circuit, phase loss, overvoltage/undervoltage on the DC bus, overspeed, and motor phase break. Prospective line Isc is 50 kA, so the drive can be installed on high-fault-capacity supplies without additional series fusing in most cases. The kit composition includes the power module, control unit, mechanical mounting kit, and a power connection set of fuses — a near-complete package for installation.

Fieldbus and I/O options

The drive ships with Modbus serial (2-wire RS-485, RTU frame, 1–247 addresses) and Modbus TCP slave access on a 10/100 Mbit/s Ethernet port. Slot A accepts option cards for Profibus DP V1, PROFINET, DeviceNet, Modbus TCP/EtherNet/IP, or CANopen (daisy chain RJ45, SUB-D 9, or screw terminals). Slot A/B also accept digital/analog I/O extension and output relay extension modules. This gives flexibility to match existing fieldbus architecture without a separate gateway.

Frequently asked questions

What are the key motor power ratings for the ATV6B0C13Q6?

The drive is rated 132 kW at 690 V normal duty and 110 kW at 690 V heavy duty. Line current is 122 A normal duty and 102 A heavy duty at 690 V.

What fieldbus options does the ATV6B0C13Q6 support?

It has built-in Modbus serial (RS-485, RTU) and Modbus TCP. Slot A accepts option cards for Profibus DP V1, PROFINET, DeviceNet, Modbus TCP/EtherNet/IP, and CANopen (three connector variants). Slot A/B also accept I/O extension and relay output modules.

Does the ATV6B0C13Q6 include an EMC filter?

Yes, it has an integrated EMC filter rated for 300 m cable runs per IEC 61800-3 category C3.

What safety functions does the ATV6B0C13Q6 provide?

It includes safe torque off (STO) rated SIL 3, along with thermal protection, overcurrent, short-circuit, phase loss, overvoltage/undervoltage, and overspeed protection for both drive and motor.

MPN
ATV6B0C13Q6