Skip to main content
Log in
Schneider Electric ATV6B0C40Q6 — AC Drive (VFD) 600V

Schneider ATV6B0C40Q6 ATV600 Drive, 400kW, 690V, C3 EMC

MPNATV6B0C40Q6
Active

Schneider Electric Altivar Process ATV600 modular drive, ATV6B0C40Q6, 400 kW at 690 V normal duty, integrated C3 EMC filter, STO SIL3, Modbus/Profibus/Ethernet.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

ATV6B0C40Q6 — Identification
ParameterValue
Product range / seriesAltivar Process ATV600
Device short name / model codeATV6B0
Product / component typeVariable speed drive
ATV6B0C40Q6 — Electrical (input)
ParameterValue
Rated supply voltage690 V - 10...10 %
Network phases3 phases
Supply frequency50...60 Hz - 5...5 %
Line (input) current363.0 A 690 V normal duty) 287.0 A 690 V heavy duty)
Prospective line short-circuit current (Isc)50 kA
EMC filterIntegrated 984.3 ft (300 m) IEC 61800-3 category C3
Max. input current THD (THDi)<5 % full load IEEE 519
ATV6B0C40Q6 — Output / Performance
ParameterValue
Apparent power434 kVA at 690 V normal duty 343 kVA at 690 V heavy duty
Continuous output current425.0 A at 2.5 kHz normal duty 340.0 A at 2.5 kHz heavy duty
Switching (PWM) frequency2...4.9 kHz adjustable with derating factor
ATV6B0C40Q6 — Communication
ParameterValue
Communication protocolsEthernet Modbus serial Modbus TCP
Address range1...247 Modbus serial
Data format8 bits, configurable odd, even or no parity Modbus serial
ATV6B0C40Q6 — Mechanical
ParameterValue
Mounting modeCabinet mount
Terminal / wiring connectionControl removable screw terminals 0.5...1.5 mm² AWG 20...AWG 16 Line side screw terminal Motor M10 x 2 bars
Product destination / compatibilitySynchronous motors Asynchronous motors
ATV6B0C40Q6 — Environmental
ParameterValue
Degree of protection (IEC, IP)UL type 1 conforming to UL 61800-5-1 (cabinet integration) UL type 12 conforming to UL 61800-5-1 (cabinet integration)
IP rating (with kit options)IP00 for IP21 or IP54 cabinet integration)IEC 61800-5-1 IP00 for IP21 or IP54 cabinet integration)IEC 60529
Operating ambient temperature14...104 °F (-10...40 °C) without derating 104...122 °F (40...50 °C) with derating factor
Storage temperature-40...158 °F (-40...70 °C)
Operating altitude (with derating)< 2000 m with current derating above 1000m
Relative humidity5...95 % without condensation IEC 60068-2-3
Pollution degree2 IEC 61800-5-1
Environmental resistance classesChemical pollution resistance class 3C3 IEC 60721-3-3 Dust pollution resistance class 3S3 IEC 60721-3-3 Humidity resistant class 3K3 IEC 60721-3-3
Vibration resistance1.5 mm peak to peak (f= 2...13 Hz) conforming to IEC 60068-2-6 0.5 gn (f= 13...200 Hz) conforming to IEC 60068-2-6
Shock resistance4 gn 11 ms IEC 60068-2-27
Acoustic noise level73 dB 86/188/EEC
ATV6B0C40Q6 — Approvals & Compliance
ParameterValue
StandardsIEC 61800-3 IEC 61800-5-1 IEC 61000-3-12 IEC 60721-3 IEC 61508 IEC 13849-1
Agency markings / approvalsCE

Product details

The ATV6B0C40Q6: Motor power: 400 kW normal duty at 690 V, 315 kW heavy duty – the heavy-duty figure governs continuous high-torque loads like conveyors and crushers; the normal-duty number applies to centrifugal pumps and fans with quadratic torque. Line current at 690 V: 363 A normal duty, 287 A heavy duty – this is the current the drive draws from the supply, not the motor full-load current. Size upstream protection and cables accordingly. Integrated EMC filter meets IEC 61800-3 category C3, meaning it is suitable for second-environment (industrial) installations with cable lengths up to 300 m. No external filter needed for typical plant-floor runs. Safe Torque Off (STO) SIL 3 – a hardware safety function that removes torque without a separate safety contactor. If your machine safety requirement calls for SIL 3, this drive already has it.

Communications and modularity

Slot A on the ATV6B0C40Q6 accepts fieldbus option cards: Profibus DP V1, PROFINET, DeviceNet, Modbus TCP/EtherNet/IP, CANopen (RJ45 or Sub-D or screw terminals). Slot A/B also accepts digital/analog I/O or relay extension modules. The base unit carries Modbus serial (RS-485, 2-wire, RTU) and Modbus TCP Ethernet (10/100 Mbit/s) as standard. Switching frequency adjustable 2–4.9 kHz; derate current for higher frequencies above 2 kHz. For motor-friendly operation at long cable runs, stay at 2 kHz.

Mechanical and environmental

Cabinet-mounted, forced-convection cooled. Pollution degree 2, vibration 1.5 mm peak-to-peak at 2–13 Hz (0.5 g at 13–200 Hz), shock 4 g for 11 ms. Relative humidity 5–95% non-condensing.

Frequently asked questions

What are the key motor power ratings of this drive?

The drive is rated 400 kW normal duty and 315 kW heavy duty at 690 V supply. Normal duty applies to variable-torque loads like pumps and fans; heavy duty for constant-torque loads like conveyors.

What communication protocols does the ATV6B0C40Q6 support?

It includes built-in Modbus serial (RS-485, RTU) and Modbus TCP Ethernet. For Profibus, PROFINET, DeviceNet, CANopen, or EtherNet/IP, install an option card in Slot A.

Does this drive have an internal EMC filter?

Yes, it has an integrated EMC filter compliant with IEC 61800-3 category C3, suitable for industrial environments with cable lengths up to 300 m.

What safety functions does the ATV6B0C40Q6 include?

It includes Safe Torque Off (STO) certified SIL 3, which can replace a safety contactor in many machine safety architectures.

MPN
ATV6B0C40Q6