Skip to main content
Log in
Schneider Electric ATV930C11N4CUS — AC Drive (VFD) 480V

ATV930C11N4CUS Altivar Process 900, 110 kW, 211 A

MPNATV930C11N4CUS
Active

Schneider Electric Altivar Process ATV900, ATV930C11N4CUS, 380-480 V three-phase, 110 kW normal duty, 211 A nominal output current, IP21, wall mount.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

ATV930C11N4CUS — Identification
ParameterValue
Product typeVariable speed drive
Product range / familyAltivar Process ATV900
ATV930C11N4CUS — Power & Output
ParameterValue
Motor power (kW)110.0 kW normal duty 90.0 kW heavy duty
Continuous output current211 A 2.5 kHz normal duty 173 A 2.5 kHz heavy duty
ATV930C11N4CUS — Input / Supply
ParameterValue
Rated supply voltage range380...480 V
Internal/auxiliary suppliesExternal supply for digital inputs 24 V DC 19...30 V), Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, Internal supply for digital inputs and STO 24 V DC 21...27 V), 1 MOhm 500 V DC for 1 minute to earth
ATV930C11N4CUS — Protection & EMC
ParameterValue
Integrated EMC filter classIntegrated With EMC plate option
EMC immunity testsElectrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
ATV930C11N4CUS — Mechanical & Cooling
ParameterValue
Degree of protection (IP)UL type 1
IP degree of protectionIP21
Acoustic noise level69.9 dB
Assembly / installation styleEnclosed
ATV930C11N4CUS — Environmental
ParameterValue
Operating ambient temperature5...122 °F (-15...50 °C) (without derating) 122...140 °F (50...60 °C) (with derating factor)
Operating altitude1000...4800 m with current derating 1 % per 100 m
Relative humidity5...95 % without condensation IEC 60068-2-3
Storage / transport temperature-40...158 °F (-40...70 °C)
Pollution degree2
Vibration resistance1.5 mm peak to peak (f= 2...13 Hz) conforming to IEC 60068-2-6 1 gn (f= 13...200 Hz) conforming to IEC 60068-2-6
ATV930C11N4CUS — Approvals
ParameterValue
Certifications & markingCE
Standards complianceUL 508C IEC 61800-3 IEC 61800-5-1 IEC 61000-3-12 IEC 60721-3 IEC 61508 IEC 13849-1
ATV930C11N4CUS — Communication
ParameterValue
Communication protocolsEtherNet/IP Modbus serial Modbus TCP

Product details

Integrator note

It delivers 110.0 kW in normal duty and 90.0 kW in heavy duty, with a nominal output current of 211 A and continuous current of 211 A at 2.5 kHz normal duty or 173 A at 2.5 kHz heavy duty. Enclosure is IP21 / UL type 1, wall-mount, without a braking chopper — plan for an external braking resistor if your deceleration profile demands it.

Control wiring and options

Digital inputs and STO require an external 24 V DC supply (range 19...30 V). There's also an internal 24 V supply for the same circuits and 10.5 V DC for a reference potentiometer (1 to 10 kOhm). The control terminal accepts 0.5...1.5 mm² / AWG 20...16, while power and motor terminals handle 2 x 50...3 x 120 mm² / AWG 1/0...300 kcmil. Communication is via Ethernet IP/Modbus TCP (half/full duplex, autonegotiation, 10/100 Mbits). Slot A accepts communication modules for Profibus DP V1, PROFINET, DeviceNet, EtherCAT, CANopen, and Ethernet Powerlink.

Compliance is broad: CE marked, UL 508C, IEC 61800-3, IEC 61800-5-1, IEC 61000-3-12, IEC 60721-3, IEC 61508, and IEC 13849-1. The embedded EMC filter is integrated; an EMC plate is optional. TAA compliant via COTS designation (BABA BAA). Ambient conditions: 5...95% relative humidity non-condensing, pollution degree 2, overvoltage category III, operating altitude up to 4800 m with 1% derating per 100 m above 1000 m.

Frequently asked questions

What are the key electrical ratings of the ATV930C11N4CUS?

Three-phase 380...480 V supply, 110 kW normal duty / 90 kW heavy duty motor power, 211 A nominal output current, continuous 211 A at 2.5 kHz normal duty or 173 A at 2.5 kHz heavy duty.

What compliance standards does this drive meet?

CE, UL 508C, IEC 61800-3/5-1, IEC 61000-3-12, IEC 60721-3, IEC 61508, IEC 13849-1, and TAA BABA BAA via COTS.

What power terminal sizes are supported?

Line, motor, and DC bus terminals accept 2 x 50...3 x 120 mm² / AWG 1/0...300 kcmil. Control terminals accept 0.5...1.5 mm² / AWG 20...16.

Does this drive include a braking chopper?

No, this is the standard version without braking chopper. Use an external braking resistor or regenerative unit for controlled deceleration.

MPN
ATV930C11N4CUS