Schneider ATV930C22N4CUS is an Altivar Process ATV900 drive for synchronous or asynchronous motors, rated 427 A continuous output at 2.5 kHz for normal duty (220 kW) and 302 A for heavy duty (160 kW) on a 380–480 V three-phase supply. It's a standard version without a braking chopper — if you need dynamic braking for vertical loads or high inertia, plan an external chopper module. Enclosed wall-mount, rated IP21 and UL Type 1, so it's for indoor dry locations; no washdown or dust-tight rating here.
Mount vertical +/-10°; the unit pulls 860 m³/h of cooling air, so keep grilles clear and allow side clearance for flow. Power terminals on line, motor, and DC bus accept 2 x 150 mm² or 2 x 350 kcmil — copper or aluminum lug compatible, but torque ratings aren't in this spec summary; confirm with the manual. Control wiring uses screw terminals 0.5–1.5 mm² (AWG 20–16). Digital inputs need an external 24 V DC supply (19–30 V). There's also an internal 10.5 V DC pot supply (1–10 kΩ) and internal 24 V DC for STO and digital inputs (21–27 V). Communication slots: one slot A for fieldbus modules (Profibus DP, PROFINET, EtherCAT, CANopen, Ethernet Powerlink, etc.), slots B and C for I/O or relay extensions. Onboard Ethernet IP/Modbus TCP with auto-negotiation.
CE marked, listed to UL 508C, and complies with IEC 61800-3 (EMC), IEC 61800-5-1 (safety), IEC 61000-3-12 (harmonics), IEC 60721-3 (environmental), IEC 61508 and IEC 13849-1 (functional safety). Integrated EMC filter meets conducted emissions for most industrial environments; the optional EMC plate can tighten radiated performance if your install is sensitive.