Skip to main content
Log in
Schneider Electric ATV930D22N4 — AC Drive (VFD) 480V

Schneider ATV930D22N4 Altivar Process Drive, 22 kW, 46.3 A

MPNATV930D22N4
Active

Schneider Electric Altivar Process ATV900 series, ATV930D22N4 variable speed drive, 22.0 kW normal duty / 18.5 kW heavy duty, 46.3 A continuous output, 380...480 V 3-phase, IP21, wall-mount, with integrated braking chopper and EMC filter.

$1,449.00Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

ATV930D22N4 — Identification
ParameterValue
Product typeVariable speed drive
Product range / familyAltivar Process ATV900
ATV930D22N4 — Power & Output
ParameterValue
Motor power (kW)22.0 kW normal duty 18.5 kW heavy duty
Continuous output current46.3 A 4 kHz normal duty 39.2 A 4 kHz heavy duty
ATV930D22N4 — Input / Supply
ParameterValue
Rated supply voltage range380...480 V
Internal/auxiliary suppliesExternal supply for digital inputs 24 V DC 19...30 V), Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, Internal supply for digital inputs and STO 24 V DC 21...27 V), 1 MOhm 500 V DC for 1 minute to earth
ATV930D22N4 — Protection & EMC
ParameterValue
Integrated EMC filter classIntegrated With EMC plate option
EMC immunity testsElectrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
ATV930D22N4 — Mechanical & Cooling
ParameterValue
Degree of protection (IP)UL type 1
IP degree of protectionIP21
Acoustic noise level59.5 dB
Assembly / installation styleEnclosed
ATV930D22N4 — Environmental
ParameterValue
Operating ambient temperature5...122 °F (-15...50 °C) (without derating) 122...140 °F (50...60 °C) (with derating factor)
Operating altitude1000...4800 m with current derating 1 % per 100 m
Relative humidity5...95 % without condensation IEC 60068-2-3
Storage / transport temperature-40...158 °F (-40...70 °C)
Pollution degree2
Vibration resistance1.5 mm peak to peak (f= 2...13 Hz) conforming to IEC 60068-2-6 1 gn (f= 13...200 Hz) conforming to IEC 60068-2-6
ATV930D22N4 — Approvals
ParameterValue
Certifications & markingCE
Standards complianceUL 508C IEC 61800-3 IEC 61800-5-1 IEC 61000-3-12 IEC 60721-3 IEC 61508 IEC 13849-1
ATV930D22N4 — Communication
ParameterValue
Communication protocolsModbus serial EtherNet/IP Modbus TCP

Product details

Duty ratings and output current

The ATV930D22N4 is rated 22.0 kW normal duty and 18.5 kW heavy duty, with continuous output current of 46.3 A at 4 kHz for normal duty and 39.2 A at 4 kHz for heavy duty — the heavy-duty figure governs applications with constant-torque loads like conveyors or extruders where the drive must sustain full torque at low speed without derating.

Wall-mount assembly, operating position vertical ±10 degrees, with 215 m³/h cooling air volume — plan for clearance above and below the drive for airflow, and check that the ambient stays within the 5...95 % non-condensing humidity envelope.

Fieldbus and I/O expansion

Three option slots (A, B, C) accept communication modules for Profibus DP V1, PROFINET, DeviceNet, EtherCAT, CANopen (daisy-chain RJ45, SUB-D 9, or screw terminals), and Ethernet Powerlink — plus digital/analog I/O extension and output relay modules. Native communication ports carry Modbus serial, EtherNet/IP, and Modbus TCP at 10/100 Mbits, with auto-negotiation half/full duplex — the drive integrates directly into a Rockwell or Schneider control architecture without a gateway.

Compliance and safety standards

Integrated EMC filter with optional EMC plate meets IEC 61000-3-12 harmonic limits; total harmonic current distortion (THDI) is below 48 % from 80 to 100 % load — sufficient for most industrial installations without external line reactors.

Production status and sourcing

Listed as current production — the ATV930D22N4 is an active Altivar Process model, not a legacy or end-of-life SKU.

Frequently asked questions

What compliance documentation does Schneider Electric provide for ATV930D22N4?

The drive carries CE marking and is certified to UL 508C, IEC 61800-3, IEC 61800-5-1, IEC 61000-3-12, IEC 60721-3, IEC 61508, and IEC 13849-1. The integrated EMC filter meets IEC 61000-3-12 harmonic limits.

MPN
ATV930D22N4