Skip to main content
Log in
Schneider Electric ATV930D75N4C — AC Drive (VFD) 480V

Schneider Electric ATV930D75N4C AC Drive, 75 kW, 380-480 V

MPNATV930D75N4C
Active

Schneider Electric Altivar Process ATV900 series, ATV930D75N4C variable speed drive, 75 kW normal duty / 55 kW heavy duty, 380-480 V 3-phase, 145 A nominal output current, IP21, wall-mount.

$11,390.00Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

ATV930D75N4C — Identification
ParameterValue
Product typeVariable speed drive
Product range / familyAltivar Process ATV900
ATV930D75N4C — Power & Output
ParameterValue
Motor power (kW)75.0 kW normal duty 55.0 kW heavy duty
Continuous output current145 A 2.5 kHz normal duty 106 A 2.5 kHz heavy duty
ATV930D75N4C — Input / Supply
ParameterValue
Rated supply voltage range380...480 V
Internal/auxiliary suppliesExternal supply for digital inputs 24 V DC 19...30 V), Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, Internal supply for digital inputs and STO 24 V DC 21...27 V), 1 MOhm 500 V DC for 1 minute to earth
ATV930D75N4C — Protection & EMC
ParameterValue
Integrated EMC filter classIntegrated With EMC plate option
EMC immunity testsElectrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
ATV930D75N4C — Mechanical & Cooling
ParameterValue
Degree of protection (IP)UL type 1
IP degree of protectionIP21
Acoustic noise level68.3 dB
Assembly / installation styleEnclosed
ATV930D75N4C — Environmental
ParameterValue
Operating ambient temperature5...122 °F (-15...50 °C) (without derating) 122...140 °F (50...60 °C) (with derating factor)
Operating altitude1000...4800 m with current derating 1 % per 100 m
Relative humidity5...95 % without condensation IEC 60068-2-3
Storage / transport temperature-40...158 °F (-40...70 °C)
Pollution degree2
Vibration resistance1.5 mm peak to peak (f= 2...13 Hz) conforming to IEC 60068-2-6 1 gn (f= 13...200 Hz) conforming to IEC 60068-2-6
ATV930D75N4C — Approvals
ParameterValue
Certifications & markingCE
Standards complianceUL 508C IEC 61800-3 IEC 61800-5-1 IEC 61000-3-12 IEC 60721-3 IEC 61508 IEC 13849-1
ATV930D75N4C — Communication
ParameterValue
Communication protocolsModbus TCP Modbus serial EtherNet/IP

Product details

75 kW normal duty, 55 kW heavy duty — the rating that decides the motor

The ATV930D75N4C is a 380-480 V 3-phase variable speed drive from the Altivar Process ATV900 series, rated 75 kW normal duty and 55 kW heavy duty at 145 A continuous output current (2.5 kHz switching frequency). The heavy duty figure governs constant-torque loads — conveyors, extruders, positive-displacement pumps — where the motor pulls rated torque across the speed range. Normal duty applies to variable-torque loads like centrifugal pumps and fans where torque falls with speed.

IP21 enclosure, wall-mount — clean indoor installation only

IP21 / UL Type 1 protection means the drive is suitable for indoor, non-condensing environments where tools are required for access. No washdown rating — keep it out of wet or dusty areas. Wall-mount only, vertical within ±10°, with 295 m³/h of cooling air volume required. The control terminals accept 0.5-1.5 mm² (AWG 20-16); the DC bus and line/motor terminals take 95-120 mm² (AWG 3/0-250 kcmil). Operating altitude derating starts at 1000 m: 1 % current derating per 100 m above that. Pollution degree 2, overvoltage category III. Vibration resistance is 1.5 mm peak-to-peak at 2-13 Hz and 1 gn at 13-200 Hz per IEC 60068-2-6; shock resistance is 15 gn for 11 ms per IEC 60068-2-27.

Built-in Ethernet, fieldbus slots, and functional safety

The drive ships with Modbus TCP, EtherNet/IP, and Modbus serial as standard communication ports. Three option slots (A, B, C) accept fieldbus modules for Profibus DP V1, PROFINET, DeviceNet, EtherCAT, CANopen, or Ethernet Powerlink, plus I/O extension and encoder interface modules. The integrated EMC filter meets IEC 61800-3 with an optional EMC plate for higher performance. Standards compliance includes UL 508C, IEC 61800-3 (EMC), IEC 61800-5-1 (safety), IEC 61508, and IEC 13849-1 — the drive supports functional safety integration including STO (Safe Torque Off) via the 24 V DC internal supply. The adjustable PID regulator handles closed-loop process control without an external controller.

Frequently asked questions

What compliance documentation does Schneider Electric provide for ATV930D75N4C?

The drive carries CE marking and UL listing per UL 508C. Standards compliance includes IEC 61800-3 (EMC), IEC 61800-5-1 (electrical safety), IEC 61000-3-12 (harmonic current emissions), IEC 60721-3 (environmental conditions), IEC 61508, and IEC 13849-1 (functional safety). RoHS and REACH declarations are available on request.

MPN
ATV930D75N4C