The Schneider Electric ATV980C71T4X1 is an Altivar Process ATV980 regenerative variable speed drive rated for 480 V ±10 % three-phase supply, delivering output to asynchronous or synchronous motors. It ships as a floor-standing compact enclosure (IP23) with a dv/dt filter choke, line choke, main switch, and a graphical operating panel in the door — essentially a pre-integrated drive cabinet for a 630 kW / 800 kW class motor (the description brackets the power range). Cooling is forced convection; ambient temperature range is 0…40 °C without derating, with derating required from 40…50 °C. Below 0 °C, an optional enclosure heater extends operation down to -10 °C. Storage range is -25…70 °C. Altitude derating applies above 1000 m: 1 % per 100 m up to 2000 m, and further derating up to 3800 m (or 4800 m depending on earthing system). Pollution degree 2 per IEC 61800-5-1 and overvoltage category III are specified, which is typical for fixed industrial installations. Communications onboard include Modbus TCP, EtherNet/IP, and Modbus serial — enough for most plant-floor control networks without an extra option card.
The ATV980C71T4X1 carries CE marking and complies with IEC 61800-2, IEC 60204-1, IEC 61800-5-1, and IEC 61800-3. EMC immunity is tested to level 3 for electrostatic discharge, radiated RF, and conducted RF, and level 4 for fast transients. Surge immunity is level 3. Product lifecycle status is current (active). No end-of-life notification or last-time-buy window exists.
Rated for vibration resistance 1.5 mm peak-to-peak at 3…20 Hz and 0.6 gn at 10…200 Hz, conforming to IEC 60068-2-6 and class 3M3 per IEC 60721-3-3. Shock resistance is 4 gn for 11 ms per IEC 60068-2-27, class 3M2. Relative humidity range 5…95 % without condensation. Enclosure is light grey RAL 7035, IP23. Operating position vertical ±10°. Environmental resistance includes chemical pollution class 3C3, dust class 3S3, and humidity class 3K3 per IEC 60721-3-3. Insulation test: 1 MΩ at 500 V DC for 1 minute to earth.