Skip to main content
Log in
Schneider Electric ATV9A0C25T6 — AC Drive (VFD) 600V

Schneider ATV9A0C25T6 ATV900 Drive, 250 hp at 600 V

MPNATV9A0C25T6
Active

Schneider Electric Altivar Process ATV900 modular drive, ATV9A0C25T6, 250 hp / 200 hp at 600 V normal/heavy duty; 218 A / 179 A line current; integrated C3 EMC filter; STO SIL3 safety.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

ATV9A0C25T6 — Identification
ParameterValue
Product range / seriesAltivar Process ATV900
Device short name / model codeATV9A0
Product / component typeVariable speed drive
ATV9A0C25T6 — Electrical (input)
ParameterValue
Rated supply voltage600 V - 10...15 %
Network phases3 phases
Supply frequency50...60 Hz +/- 5 %
Line (input) current218.0 A 600 V normal duty) 179.0 A 600 V heavy duty)
Prospective line short-circuit current (Isc)50 kA
EMC filterIntegrated 984.3 ft (300 m) IEC 61800-3 category C3
Max. input current THD (THDi)<48 % from 80...100 % of load
ATV9A0C25T6 — Output / Performance
ParameterValue
Apparent power227.0 kVA at 600 V normal duty 186.0 kVA at 600 V heavy duty
Continuous output current275.0 A at 2.5 kHz normal duty 215.0 A at 2.5 kHz heavy duty
Switching (PWM) frequency2...4.9 kHz adjustable with derating factor
ATV9A0C25T6 — Communication
ParameterValue
Communication protocolsEtherNet/IP Modbus serial Modbus TCP
Address range1...247 Modbus serial
Data format8 bits, configurable odd, even or no parity Modbus serial
ATV9A0C25T6 — Mechanical
ParameterValue
Mounting modeCabinet mount
Terminal / wiring connectionControl removable screw terminals 0.5...1.5 mm² AWG 20...AWG 16 Line side screw terminal Motor M10 x 2 bars
Product destination / compatibilitySynchronous motors Asynchronous motors
ATV9A0C25T6 — Environmental
ParameterValue
Degree of protection (IEC, IP)UL type 1 conforming to UL 61800-5-1 (cabinet integration) UL type 12 conforming to UL 61800-5-1 (cabinet integration)
IP rating (with kit options)IP00 for IP21 or IP54 cabinet integration)IEC 61800-5-1 IP00 for IP21 or IP54 cabinet integration)IEC 60529
Operating ambient temperature23...104 °F (-5...40 °C) without derating 104...122 °F (40...50 °C) with derating factor
Storage temperature-40...158 °F (-40...70 °C)
Operating altitude (with derating)0...2000 m with current derating above 1000m
Relative humidity5...95 % without condensation IEC 60068-2-3
Pollution degree2 IEC 61800-5-1
Environmental resistance classesChemical pollution resistance class 3C3 IEC 60721-3-3 Dust pollution resistance class 3S3 IEC 60721-3-3
Vibration resistance1.5 mm peak to peak (f= 2...13 Hz) conforming to IEC 60068-2-6 0.5 gn (f= 13...200 Hz) conforming to IEC 60068-2-6
Shock resistance4 gn 11 ms IEC 60068-2-27
Acoustic noise level70 dB 86/188/EEC
ATV9A0C25T6 — Approvals & Compliance
ParameterValue
StandardsIEC 61800-3 IEC 61800-5-1 IEC 61000-3-12 IEC 60721-3 IEC 61508 IEC 13849-1 UL 61800-5-1
Agency markings / approvalsCE

Product details

Drive specifications and motor ratings

The ATV9A0C25T6 is a modular Altivar Process ATV900 drive rated for 250 hp at 600 V normal duty and 200 hp at 600 V heavy duty, drawing 218 A and 179 A line current respectively. Apparent power is 227 kVA (normal) / 186 kVA (heavy) at 600 V. Prospective line Isc is 50 kA, which sets the SCCR requirement for upstream protection. The drive supports both synchronous and asynchronous motors, with adjustable switching frequency from 2 kHz to 4.9 kHz (derated). Forced convection cooling keeps it within a 0-2000 m altitude envelope, derating above 1000 m. The integrated EMC filter meets IEC 61800-3 category C3 for 300 m cable runs, suitable for industrial installations with isolated neutral or IT mains.

Control supplies, communication, and safety

Drive control logic requires an external 24 V DC supply (19...30 V) for digital inputs, plus a separate 24 V DC supply (21...27 V) for STO and internal digital input power. An internal 10.5 V DC reference supply is provided for a 1-10 kΩ potentiometer. Communication options are extensive: slot A accepts module cards for Profibus DP V1, PROFINET, DeviceNet, EtherCAT, CANopen (RJ45, SUB-D 9, or screw terminal), and Ethernet IP/Modbus TCP. Slots A/B/C can host digital/analog I/O or relay expansion modules. Slot B accepts encoder interface modules (digital 5/12 V, analog, or resolver). The drive comes with a built-in Modbus serial port (2-wire RS 485, RTU, 1-247 addresses, configurable parity). Ethernet IP/Modbus TCP interface supports half/full duplex and 10/100 Mbit/s. No Modbus bridge inside—fieldbus protocol is determined by the option card in slot A. The drive also provides extensive protective functions: thermal protection for motor and drive, motor phase break, overcurrent, overspeed, line supply undervoltage/phase loss, and earth fault protection.

Standards, compliance, and sourcing

This drive is CE-marked and complies with IEC 61800-3, IEC 61800-5-1, IEC 61000-3-12, IEC 60721-3, IEC 61508, IEC 13849-1, and UL 61800-5-1. It carries IP00 protection as standard, intended for IP21 or IP54 cabinet integration UL Type 1 or Type 12 when mounted in an enclosure. The modular kit includes a control unit, mechanical mounting kit, power connection set, set of fuses, 200 kW power module, and front cover. All terminal connections are screw-type (control: 0.5-1.5 mm²; line and motor: M10 bars).

Frequently asked questions

What supply voltages does the ATV9A0C25T6 require?

It requires an external 24 V DC supply (19...30 V) for digital inputs and a separate 24 V DC supply (21...27 V) for STO and internal digital input power. An internal 10.5 V DC reference is provided for a 1-10 kΩ potentiometer.

What communication interfaces are available on the ATV9A0C25T6?

The drive has built-in Modbus serial (2-wire RS 485, RTU, 10/100 Mbit/s Ethernet IP/Modbus TCP). Slot A accepts a wide range of option cards: Profibus DP V1, PROFINET, DeviceNet, EtherCAT, CANopen (multiple variants). Slots B and C can host I/O or encoder interface modules.

What is the EMC compliance of this drive?

The integrated EMC filter meets IEC 61800-3 category C3, suitable for 300 m cable runs in industrial environments. For other categories, an external filter may be needed.

MPN
ATV9A0C25T6