Skip to main content
Log in
Schneider Electric ATV9A0C80N6 — AC Drives (VFD)

Schneider ATV9A0C80N6 Altivar Process 900, 560 kW Drive

MPNATV9A0C80N6
Active

Schneider Electric Altivar Process ATV900, modular variable speed drive, 560 kW normal duty at 500 V, integrated EMC filter C3, STO SIL3.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

ATV9A0C80N6 — Identification
ParameterValue
Product rangeAltivar Process ATV900
Product / component typeVariable speed drive
ATV9A0C80N6 — Power & Current
ParameterValue
Continuous output current830.0 A at 2.5 kHz normal duty 650.0 A at 2.5 kHz heavy duty
ATV9A0C80N6 — Control & Communication
ParameterValue
Switching frequency2.5 kHz
Synchronous motor control profilePermanent magnet motor Synchronous reluctance motor
Communication protocols / portsEtherNet/IP Modbus serial Modbus TCP
Acceleration / deceleration rampsLinear adjustable separately from 0.01...9999 s
Product destinationSynchronous motors Asynchronous motors
ATV9A0C80N6 — Protection & Environmental
ParameterValue
Protection functionsThermal protection motor Safe torque off motor Motor phase break motor Thermal protection drive Safe torque off drive Overheating drive Overcurrent between output phases and earth drive Overload of output voltage drive Short-circuit protection drive Motor phase break drive Overvoltages on the DC bus drive Line supply overvoltage drive Line supply undervoltage drive Line supply phase loss drive Overspeed drive Break on the control circuit drive
Degree of protection (IP)UL type 1 conforming to UL 61800-5-1 (cabinet integration) UL type 12 conforming to UL 61800-5-1 (cabinet integration)
IP degree of protectionIP00 for IP21 or IP54 cabinet integration)IEC 61800-5-1 IP00 for IP21 or IP54 cabinet integration)IEC 60529
ATV9A0C80N6 — Electrical
ParameterValue
Supply frequency50...60 Hz +/- 5 %
Network number of phases3 phases

Product details

What the ratings tell you

The ATV9A0C80N6: Line current is 756 A normal duty, 610 A heavy duty at 500 V – so the heavy-duty number is your continuous thermal limit when the motor is fully loaded. Apparent power comes in at 655 kVA normal, 528 kVA heavy. The switching frequency is adjustable from 2 to 4.9 kHz, but every kHz above 2 pulls a derating factor, so plan your motor cable length and heat sink accordingly. Total harmonic current distortion stays below 48 % from 80 to 100 % load – that's good for grid compliance without extra line reactors in most industrial sites.

Compliance & integration

CE marked, meets IEC 61800-3 (EMC), IEC 61800-5-1 (safety), IEC 61508 and ISO 13849-1 for functional safety. The enclosure can be configured as UL Type 1 or Type 12 (cabinet integration). Mounting is cabinet-mount, forced convection cooling. Control connections use removable screw terminals (0.5–1.5 mm²), line and motor connections are M10 bars. Slot A/B/C accept communication or I/O extension modules – Profibus, PROFINET, EtherCAT, CANopen, DeviceNet, or digital/analog/relay expansions.

Frequently asked questions

What are the key supply requirements?

Digital inputs need an external 24 V DC supply (19–30 V). There's also an internal 10.5 V DC supply for a reference potentiometer (1–10 kΩ), and a separate 24 V DC supply for digital inputs and STO (21–27 V). Insulation resistance is 1 MΩ at 500 V DC for 1 minute.

What certifications does this drive hold?

CE marking, plus compliance with IEC 61800-3, IEC 61800-5-1, IEC 61000-3-12, IEC 60721-3, IEC 61508, and ISO 13849-1. Enclosure meets UL Type 1 and Type 12 per UL 61800-5-1.

MPN
ATV9A0C80N6