Skip to main content
Log in
Schneider Electric ATV9B0C20Q6 — AC Drive (VFD) 600V

Schneider ATV9B0C20Q6 Altivar Process ATV900, 200 kW at 690

MPNATV9B0C20Q6
Active

Schneider Electric Altivar Process ATV900, ATV9B0C20Q6, 200 kW at 690 V normal duty, 160 kW heavy duty, modular cabinet-mount drive with integrated EMC filter and STO.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

ATV9B0C20Q6 — Identification
ParameterValue
Product range / seriesAltivar Process ATV900
Device short name / model codeATV9B0
Product / component typeVariable speed drive
ATV9B0C20Q6 — Electrical (input)
ParameterValue
Rated supply voltage690 V - 10...15 %
Network phases3 phases
Supply frequency50...60 Hz +/- 5 %
Line (input) current183.0 A 690 V normal duty) 148.0 A 690 V heavy duty) 121.0 A 690 V regenerative mode normal duty) 99.0 A 690 V regenerative mode heavy duty)
Prospective line short-circuit current (Isc)50 kA
EMC filterIntegrated 984.3 ft (300 m) IEC 61800-3 category C3
Max. input current THD (THDi)<5 % full load IEEE 519
ATV9B0C20Q6 — Output / Performance
ParameterValue
Apparent power219.0 kVA at 690 V normal duty 177.0 kVA at 690 V heavy duty 145.0 kVA at 690 V normal duty regenerative mode 119.0 kVA at 690 V heavy duty regenerative mode
Continuous output current215.0 A at 2.5 kHz normal duty 175.0 A at 2.5 kHz heavy duty 175.0 A at 2.5 kHz normal duty regenerative mode 145.0 A at 2.5 kHz heavy duty regenerative mode
Switching (PWM) frequency2...4.9 kHz adjustable with derating factor
ATV9B0C20Q6 — Communication
ParameterValue
Communication protocolsEtherNet/IP Modbus serial Modbus TCP
Address range1...247 Modbus serial
Data format8 bits, configurable odd, even or no parity Modbus serial
ATV9B0C20Q6 — Mechanical
ParameterValue
Mounting modeCabinet mount
Terminal / wiring connectionControl removable screw terminals 0.5...1.5 mm² AWG 20...AWG 16 Line side screw terminal Motor M10 x 2 bars
Product destination / compatibilitySynchronous motors Asynchronous motors
ATV9B0C20Q6 — Environmental
ParameterValue
Degree of protection (IEC, IP)UL type 1 conforming to UL 61800-5-1 (cabinet integration) UL type 12 conforming to UL 61800-5-1 (cabinet integration)
IP rating (with kit options)IP00 for IP21 or IP54 cabinet integration)IEC 61800-5-1 IP00 for IP21 or IP54 cabinet integration)IEC 60529
Operating ambient temperature23...104 °F (-5...40 °C) without derating 104...122 °F (40...50 °C) with derating factor
Storage temperature-40...158 °F (-40...70 °C)
Operating altitude (with derating)0...2000 m with current derating above 1000m
Relative humidity5...95 % without condensation IEC 60068-2-3
Pollution degree2 IEC 61800-5-1
Environmental resistance classesChemical pollution resistance class 3C3 IEC 60721-3-3 Dust pollution resistance class 3S3 IEC 60721-3-3
Vibration resistance1.5 mm peak to peak (f= 2...13 Hz) conforming to IEC 60068-2-6 0.5 gn (f= 13...200 Hz) conforming to IEC 60068-2-6
Shock resistance4 gn 11 ms IEC 60068-2-27
Acoustic noise level70 dB 86/188/EEC
ATV9B0C20Q6 — Approvals & Compliance
ParameterValue
StandardsIEC 61800-3 IEC 61800-5-1 IEC 61000-3-12 IEC 60721-3 IEC 61508 IEC 13849-1
Agency markings / approvalsCE

Product details

The Schneider ATV9B0C20Q6 is an Altivar Process ATV900 modular cabinet-mount drive rated for 200 kW at 690 V normal duty and 160 kW at 690 V heavy duty, with corresponding line currents of 183 A and 148 A respectively. It also supports regenerative-mode operation at 160 kW normal duty (121 A) and 132 kW heavy duty (99 A).

The 690 V line-current figures define the input conductor and fuse sizing: 183 A for normal-duty motor loads, 148 A for heavy-duty cycles. The apparent power of 219 kVA at 690 V normal duty gives the transformer or generator sizing reference. Switching frequency is adjustable from 2 to 4.9 kHz with derating, so you can trade audible noise against motor heating — the 70 dB noise level at rated conditions is a panel-enclosure planning figure. The integrated EMC filter meets IEC 61800-3 category C3 for 300 m cable runs, which covers most industrial installations without an external filter.

Control supply and wiring

The drive provides three internal supplies: 24 V DC (19...30 V) for digital inputs, 10.5 V DC ±5 % for a 1 to 10 kΩ reference potentiometer, and a separate 24 V DC (21...27 V) supply for digital inputs and STO. The control terminals accept 0.5 to 1.5 mm² (AWG 20–16) screw terminals. Communication is handled by dual RJ45 ports for Ethernet IP/Modbus TCP plus a separate RJ45 for Modbus serial (RS-485, 2-wire, RTU frame, 4.8–38.4 kbit/s). Slot A accepts Profibus DP V1, PROFINET, DeviceNet, CANopen, or EtherCAT option cards; slots A/B/C accept digital/analog I/O or relay extension modules.

Frequently asked questions

What are the motor power ratings for this drive?

The ATV9B0C20Q6 is rated for 200 kW at 690 V normal duty and 160 kW at 690 V heavy duty, with regenerative-mode ratings of 160 kW normal duty and 132 kW heavy duty.

What communication protocols are supported?

The drive has dual Ethernet IP/Modbus TCP ports and a Modbus serial RS-485 port. Slot A accepts option cards for Profibus DP V1, PROFINET, DeviceNet, CANopen, or EtherCAT.

MPN
ATV9B0C20Q6