Skip to main content
Log in
Schneider Electric ATV9B0C31N6 — AC Drives (VFD)

Schneider ATV9B0C31N6 AC Drive, 220 kW at 500 V

MPNATV9B0C31N6
Active

Schneider Electric Altivar Process ATV900 series, modular VFD, ATV9B0C31N6, 220 kW at 500 V normal duty, 160 kW heavy duty, IP00 for cabinet integration, CE marked.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

ATV9B0C31N6 — Identification
ParameterValue
Product rangeAltivar Process ATV900
Product / component typeVariable speed drive
ATV9B0C31N6 — Power & Current
ParameterValue
Continuous output current340.0 A at 2.5 kHz normal duty 275.0 A at 2.5 kHz heavy duty 340.0 A at 2.5 kHz normal duty regenerative mode 275.0 A at 2.5 kHz heavy duty regenerative mode
ATV9B0C31N6 — Control & Communication
ParameterValue
Switching frequency2.5 kHz
Synchronous motor control profilePermanent magnet motor Synchronous reluctance motor
Communication protocols / portsEtherNet/IP Modbus serial Modbus TCP
Acceleration / deceleration rampsLinear adjustable separately from 0.01...9999 s
Product destinationSynchronous motors Asynchronous motors
ATV9B0C31N6 — Protection & Environmental
ParameterValue
Protection functionsThermal protection motor Safe torque off motor Motor phase break motor Thermal protection drive Safe torque off drive Overheating drive Overcurrent between output phases and earth drive Overload of output voltage drive Short-circuit protection drive Motor phase break drive Overvoltages on the DC bus drive Line supply overvoltage drive Line supply undervoltage drive Line supply phase loss drive Overspeed drive Break on the control circuit drive
Degree of protection (IP)UL type 1 conforming to UL 61800-5-1 (cabinet integration) UL type 12 conforming to UL 61800-5-1 (cabinet integration)
IP degree of protectionIP00 for IP21 or IP54 cabinet integration)IEC 61800-5-1 IP00 for IP21 or IP54 cabinet integration)IEC 60529
ATV9B0C31N6 — Electrical
ParameterValue
Supply frequency50...60 Hz +/- 5 %
Network number of phases3 phases

Product details

Power stage and duty-cycle rating

The ATV9B0C31N6: The line current at 500 V normal duty is 278 A; heavy duty drops to 204 A, and regenerative modes carry their own lower figures (231 A normal, 167 A heavy). Apparent power follows the same pattern: 241 kVA normal duty, 176 kVA heavy duty, with regenerative-mode ratings at 200 kVA and 145 kVA respectively. The 50 kA prospective line Isc rating means the input circuit must coordinate with upstream protection capable of interrupting that fault level.

Safety, compliance, and fieldbus integration

The integrated EMC filter handles 300 m cable runs at Category C3 per IEC 61800-3, which covers second-environment industrial installations. Three option-card slots (Slot A, B, C) accept fieldbus modules for Profibus DP V1, PROFINET, DeviceNet, CANopen, or EtherCAT, plus digital/analog I/O and output relay expansion. The native Modbus serial port (2-wire RS-485, RTU) and dual RJ45 Ethernet IP/Modbus TCP ports are on the terminal block — no extra card needed for basic Ethernet comms.

Frequently asked questions

What is the IP rating of the ATV9B0C31N6?

The drive carries an IP00 rating for cabinet integration, meaning it is intended for installation inside an enclosure that provides at least IP21 or IP54 protection per IEC 61800-5-1 and IEC 60529. The open-frame design requires a panel for environmental sealing.

Does the ATV9B0C31N6 include a built-in EMC filter?

Yes, it includes an integrated EMC filter rated for 300 m cable runs and compliant with IEC 61800-3 Category C3, which covers industrial environments with a second-environment classification.

MPN
ATV9B0C31N6