Skip to main content
Schneider Electric ATV9B0C40T6

Schneider Electric ATV9B0C40T6 Altivar Process 900 AC Drive

MPN ATV9B0C40T6
Active

Schneider Electric Altivar Process ATV900 series, ATV9B0C40T6 modular AC drive, 450 hp at 600 V normal duty, 350 hp heavy duty, forced convection cooling, cabinet mount, IP00 for IP21/IP54 integration.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ATV9B0C40T6 specifications
ParameterValue
Main product or component typeVariable speed drive
Frequency50...60 Hz +/- 5 %
Temp storage max70 °C
Temp storage min-40 °C
Temp operating max60 °C
Temp operating min1.2 °C
Storage temperature-40...158 °F (-40...70 °C)
Pollution degreePollution degree 2

Product details

450 hp at 600 V — normal and heavy duty profiles

The ATV9B0C40T6 is a modular Altivar Process ATV900 drive rated 450 hp at 600 V normal duty and 350 hp at 600 V heavy duty. The heavy-duty line current is 277 A versus 355 A for normal duty — the same drive handles a pump or fan at full nameplate or a crusher/conveyor at the lower derated figure. Apparent power tracks the duty: 369 kVA normal, 288 kVA heavy. The regenerative-mode ratings drop further to 237 kVA normal and 169 kVA heavy, which matters if the application decelerates a high-inertia load and needs to sink regenerated power back to the line.

STO SIL 3 and integrated EMC filter

The drive also integrates an EMC filter rated for 300 m cable runs to IEC 61800-3 category C3, which covers most industrial environments without an external filter. Total harmonic current distortion (THDI) stays below 5 % at full load per IEEE 519 — the active front-end or integrated line reactor handles the harmonics without an add-on filter in most utility grids.

Fieldbus and I/O expansion slots

The control unit carries two RJ45 ports for Ethernet IP/Modbus TCP and one RJ45 for Modbus serial, plus a 2-wire RS-485 physical interface. Slot A accepts Profibus DP V1, PROFINET, DeviceNet, CANopen, or EtherCAT communication modules; slots A/B/C also accept digital/analog I/O extension and relay output modules. Slot B supports a 5/12 V digital encoder interface, analog encoder interface, or resolver interface. Modbus serial runs at 4.8, 9.6, 19.2, or 38.4 kbit/s with RTU frame and configurable parity; Ethernet ports run at 10/100 Mbit/s. The drive supports 1–247 Modbus addresses.

MPN
ATV9B0C40T6