Skip to main content
Schneider Electric ATV9B0C63T6

Schneider ATV9B0C63T6 Altivar Process ATV900 Drive, 650 hp

MPN ATV9B0C63T6
Active

Schneider Electric Altivar Process ATV900, modular VFD, ATV9B0C63T6, 650 hp at 600 V normal duty, 511 A line current, STO SIL 3, integrated C3 EMC filter.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ATV9B0C63T6 specifications
ParameterValue
Connector type2 RJ45 Ethernet IP/Modbus TCP on terminal 1 RJ45 Modbus serial on terminal
Main product or component typeVariable speed drive
Current511.0 A 600 V normal duty) 434.0 A 600 V heavy duty) 361.0 A 600 V regenerative mode normal duty) 295.0 A 600 V regenerative mode heavy duty)
Horsepower650.0 hp at 600 V normal duty 550.0 hp at 600 V heavy duty 550.0 hp at 600 V normal duty regenerative mode 450.0 hp at 600 V heavy duty regenerative mode
Frequency50...60 Hz +/- 5 %
Temp storage max70 °C
Temp storage min-40 °C
Temp operating max60 °C
Temp operating min1.2 °C
Storage temperature-40...158 °F (-40...70 °C)
Pollution degreePollution degree 2
Data format8 bits, configurable odd, even or no parity Modbus serial
Operating temperature23...104 °F (-5...40 °C) without derating 104...122 °F (40...50 °C) with derating factor

Product details

The Schneider ATV9B0C63T6 is an Altivar Process ATV900 modular drive, rated for 650 hp at 600 V normal duty and 550 hp at 600 V heavy duty. Line current runs 511 A normal duty, 434 A heavy duty, and the drive handles regenerative loads at 361 A normal duty, 295 A heavy duty. Apparent power is 531 kVA at 600 V normal duty, 451 kVA heavy duty. Motor phase loss, overcurrent, overvoltage, undervoltage, and overspeed protections are all built in, with STO (safe torque off) rated SIL 3.

Slot assignments and fieldbus

Slot A accepts a Profibus DP V1, PROFINET, DeviceNet, CANopen (RJ45, SUB-D 9, or screw terminals), or EtherCAT communication module. Slots A, B, and C accept digital/analog I/O extension modules or output relay extension modules. Slot B also takes 5/12 V digital encoder, analog encoder, or resolver interface modules. The drive has two RJ45 Ethernet IP/Modbus TCP ports and one RJ45 Modbus serial port. Modbus serial runs RTU at 4.8, 9.6, 19.2, or 38.4 kbit/s; Ethernet ports run 10/100 Mbit/s.

Control supply and wiring

Digital inputs need an external 24 V DC supply (19...30 V). The drive provides an internal 10.5 V DC ±5 % reference for a 1 to 10 kOhm potentiometer, and a separate internal 24 V DC (21...27 V) supply for digital inputs and STO. Control wiring uses removable screw terminals accepting 0.5...1.5 mm² (AWG 20...16). Line-side connection is screw terminal; motor connection uses M10 x 2 bars.

EMC and compliance

An integrated EMC filter meets IEC 61800-3 category C3 for 300 m cable runs. Total harmonic current distortion (THDI) is under 5 % at full load per IEEE 519. The drive complies with IEC 61800-3, IEC 61800-5-1, IEC 61000-3-12, IEC 60721-3, IEC 61508, IEC 13849-1, and UL 61800-5-1. Marking is CE. Pollution degree 2 per IEC 61800-5-1. Prospective line short-circuit current is 50 kA. Operating altitude is 0 to 2000 m with derating above 1000 m.

MPN
ATV9B0C63T6