Schneider Electric BCH16LH10330F6C
MPNBCH16LH10330F6C
Obsolete
servo motor BCH16, Lexium 16D, 100mm, 1.0kW, Low inertia, 3000rpm 200/240Vac, brake
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
Specifications
| Parameter | Value |
|---|---|
| Feedback type | 2500 incremental encoder |
| Type of cooling | Natural convection |
| Range of product | Lexium 16D |
| Product or component type | Servo motor |
| Supply voltage | 220 V |
| Maximum current irms | 21.9 A for LXM16D at 1.0 kW, 220 V |
| Continuous stall current | 6.6 A |
| Maximum permanent current | 21.8 A |
| Continuous power | 1000 W |
| Brake pull-in power | 17.5 W |
| Nominal output power | 1000 W for LXM16D at 10.13 A, 220 V, single phase |
| Network number of phases | 3 phases |
All specifications
| Parameter | Value |
|---|---|
| IP degree of protection | IP65 IM B5, IM V1 IP65 IM V3 |
| Mounting support | Asian standard flange |
| Mounting holes diameter | 9 mm |
| Number of mounting holes | 4 |
| Circle diameter of the mounting holes | 115 mm |
| Electrical connection | Connector MIL |
| Depth | 179.5 mm |
| Width | 100 mm |
| Height | 153.4 mm |
| Key width | 6 mm |
| Product weight | 4.7 kg |
| Centring collar depth | 3 mm |
| Length | 179.5 mm |
| Shaft end | Parallel key |
| Second shaft | Without second shaft end |
| Shaft length | 42 mm |
| Holding brake | With |
| Nominal speed | 3000 rpm for LXM16D at 10.13 A, 220 V, single phase |
| Rotor inertia | 2.75 kg.cm² |
| Holding torque | 6.5 N.m built-in |
| Nominal torque | 3.18 N.m for LXM16D at 10.13 A, 220 V, single phase |
| Shaft diameter | 19 mm |
| Torque constant | 0.48 N.m/A at 20 °C |
| Back emf constant | 32 V/krpm at 20 °C |
| Device short name | BCH16 |
| Motor flange size | 100 mm |
| Peak stall torque | 9.55 N.m for LXM16D at 10.13 A, 220 V, single phase |
| Stator inductance | 4.3 mH at 20 °C |
| Stator resistance | 0.7 Ohm at 20 °C |
| Maximum axial force fa | 122.3 N |
| Continuous stall torque | 3.18 N.m for LXM16D at 10.13 A, 220 V, single phase |
| Maximum radial force fr | 343.98 N at 3000 rpm |
| Centring collar diameter | 95 mm |
| Maximum mechanical speed | 5000 rpm |
| Distance shaft shoulder-flange | 50 mm |
| Stator electrical time constant | 6.14 ms at 20 °C |
| Ambient air temperature for operation | 0...40 °C |
MPN
BCH16LH10330F6C