Schneider Electric BCH2HM1022CA6C
MPNBCH2HM1022CA6C
Active
servo motor BCH, Lexium 28, 130mm, 1000W, 8.41kg.cm², with oil seal, without key, straight connection
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jun 2026
Specifications
| Parameter | Value |
|---|---|
| Product type | Servo motor |
| Holding brake | Without |
| Parameter | Value |
|---|---|
| Nominal torque | 4.77 N.m for LXM28... at 7 A, 220 V, single phase 4.77 N.m for LXM28... at 7 A, 220 V, three phase |
| Nominal output power | 1000 W for LXM28... at 7 A, 220 V, single phase 1000 W for LXM28... at 7 A, 220 V, three phase |
| Continuous power | 1000 W |
| Nominal speed | 2000 rpm for LXM28... at 7 A, 220 V, single phase 2000 rpm for LXM28... at 7 A, 220 V, three phase |
| Maximum mechanical speed | 3000 rpm |
| Continuous stall torque | 4.77 N.m for LXM28 at 7 A, 220 V, single phase 4.77 N.m for LXM28 at 7 A, 220 V, three phase |
| Peak stall torque | 14.3 N.m for LXM28... at 7 A, 220 V, single phase 14.3 N.m for LXM28... at 7 A, 220 V, three phase |
| Rotor inertia | 8.41 kg.cm² |
| Parameter | Value |
|---|---|
| Rated supply voltage (Us) | 220 V |
| Network phases | 1 |
| Maximum current (Irms) | 20 A for LXM28... at 1 kW, 220 V |
| Continuous stall current | 5.77 A |
| Maximum permanent current | 6.29 A |
| Torque constant | 0.83 N.m/A at 20 °C |
| Back-EMF constant | 50 V/krpm at 20 °C |
| Number of motor poles | 5.0 |
| Stator resistance | 0.62 Ohm at 20 °C |
| Stator inductance | 7.14 mH at 20 °C |
| Stator electrical time constant | 11.94 ms at 20 °C |
| Electrical connection | Connector MIL |
| Parameter | Value |
|---|---|
| Feedback type | 20 bits single turn absolute encoder |
| Parameter | Value |
|---|---|
| Shaft end style | Smooth shaft |
| Shaft diameter | 22 mm |
| Shaft length | 55 mm |
| Motor flange size | 130 mm |
| Mounting support | Asian standard flange |
| Length | 147 mm |
| Number of mounting holes | 4 |
| Mounting-hole diameter | 9.2 mm |
| Mounting-hole bolt circle diameter | 145 mm |
| Centring collar diameter | 110 mm |
| Centring collar depth | 8 mm |
| Maximum radial force (Fr) | 670 N at 2000 rpm |
| Maximum axial force (Fa) | 200 N |
| Parameter | Value |
|---|---|
| IP degree of protection | IP50 IM V3 IP65 IM B5, IM V1 |
| Cooling method | Natural convection |
| Winding (copper hot) temperature | 135 °C |
MPN
BCH2HM1022CA6C