Schneider Electric BCH2HR2023CA6C
MPNBCH2HR2023CA6C
Active
servo motor BCH2, Lexium, 180mm, 2000W, 34.68kg.cm², with oil seal, with key, straight connection
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsListing updated Jun 2026
Specifications
Identification
| Parameter | Value |
|---|---|
| Product type | Servo motor |
| Holding brake | Without |
Performance
| Parameter | Value |
|---|---|
| Nominal torque | 9.55 N.m for LXM28... at 9.6 mA, 220 V, single phase 9.55 N.m for LXM28... at 9.6 mA, 220 V, three phase 9.55 N.m for LXM26D at 9.6 mA, 220 V, single phase 9.55 N.m for LXM26D at 9.6 mA, 220 V, three phase |
| Nominal output power | 2000 W for LXM28... at 9.6 mA, 220 V, single phase 2000 W for LXM28... at 9.6 mA, 220 V, three phase 2000 W for LXM26D at 9.6 mA, 220 V, single phase 2000 W for LXM26D at 9.6 mA, 220 V, three phase |
| Continuous power | 2000 W |
| Nominal speed | 2000 rpm for LXM28... at 9.6 mA, 220 V, single phase 2000 rpm for LXM28... at 9.6 mA, 220 V, three phase 2000 rpm for LXM26D at 9.6 mA, 220 V, single phase 2000 rpm for LXM26D at 9.6 mA, 220 V, three phase |
| Maximum mechanical speed | 3000 rpm |
| Continuous stall torque | 9.55 N.m for LXM28 at 9.6 mA, 220 V, single phase 9.55 N.m for LXM28 at 9.6 mA, 220 V, three phase 9.55 N.m for LXM26D at 9.6 mA, 220 V, single phase 9.55 N.m for LXM26D at 9.6 mA, 220 V, three phase |
| Peak stall torque | 28.6 N.m for LXM28... at 9.6 mA, 220 V, single phase 28.6 N.m for LXM28... at 9.6 mA, 220 V, three phase 28.6 N.m for LXM26D at 9.6 mA, 220 V, single phase 28.6 N.m for LXM26D at 9.6 mA, 220 V, three phase |
| Rotor inertia | 34.68 kg.cm² |
Electrical
| Parameter | Value |
|---|---|
| Rated supply voltage (Us) | 220 V |
| Network phases | 3 |
| Maximum current (Irms) | 35.5 A for LXM28... at 2 kW, 220 V |
| Continuous stall current | 8.75 A |
| Maximum permanent current | 9.6 A |
| Torque constant | 1.09 N.m/A at 20 °C |
| Back-EMF constant | 66 V/krpm at 20 °C |
| Number of motor poles | 5.0 |
| Stator resistance | 0.34 Ohm at 20 °C |
| Stator inductance | 6.1 mH at 20 °C |
| Stator electrical time constant | 13.24 ms at 20 °C |
| Electrical connection | Connector MIL |
Feedback
| Parameter | Value |
|---|---|
| Feedback type | 20 bits single turn absolute encoder |
Mechanical
| Parameter | Value |
|---|---|
| Shaft end style | Keyed |
| Shaft diameter | 35 mm |
| Shaft length | 79 mm |
| Key width | 10 mm |
| Motor flange size | 180 mm |
| Mounting support | Asian standard flange |
| Length | 187 mm |
| Number of mounting holes | 4 |
| Mounting-hole diameter | 9.2 mm |
| Mounting-hole bolt circle diameter | 145 mm |
| Centring collar diameter | 110 mm |
| Centring collar depth | 8 mm |
| Maximum radial force (Fr) | 670 N at 2000 rpm |
| Maximum axial force (Fa) | 200 N |
Environmental
| Parameter | Value |
|---|---|
| IP degree of protection | IP50 IM V3 IP65 IM B5, IM V1 |
| Cooling method | Natural convection |
| Winding (copper hot) temperature | 135 °C |
MPN
BCH2HR2023CA6C