Schneider Electric BCH2LH2033MA6C
MPNBCH2LH2033MA6C
Active
servo motor BCH2, Lexium, 100mm, 2000W, with oil seal, with key, 20 bit MT encoder, straight connection
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsListing updated Jun 2026
Specifications
Identification
| Parameter | Value |
|---|---|
| Product type | Servo motor |
| Holding brake | Without |
Performance
| Parameter | Value |
|---|---|
| Nominal torque | 6.37 N.m for LXM26D at 12 A, 220 V, three phase 6.37 N.m for LXM28... at 12 A, 220 V, three phase 6.37 N.m for LXM28... at 12 A, 220 V, single phase 6.37 N.m for LXM26D at 12 A, 220 V, single phase |
| Nominal output power | 2000 W for LXM26D at 12 A, 220 V, three phase 2000 W for LXM28... at 12 A, 220 V, three phase 2000 W for LXM28... at 12 A, 220 V, single phase 2000 W for LXM26D at 12 A, 220 V, single phase |
| Continuous power | 2000 W |
| Nominal speed | 3000 rpm for LXM26D at 12 A, 220 V, three phase 3000 rpm for LXM28... at 12 A, 220 V, three phase 3000 rpm for LXM28... at 12 A, 220 V, single phase 3000 rpm for LXM26D at 12 A, 220 V, single phase |
| Maximum mechanical speed | 5000 rpm |
| Continuous stall torque | 6.37 N.m for LXM26D at 12 A, 220 V, three phase 6.37 N.m for LXM28 at 12 A, 220 V, three phase 6.37 N.m for LXM28 at 12 A, 220 V, single phase 6.37 N.m for LXM26D at 12 A, 220 V, single phase |
| Peak stall torque | 19.11 N.m for LXM26D at 12 A, 220 V, three phase 19.11 N.m for LXM28... at 12 A, 220 V, three phase 19.11 N.m for LXM28... at 12 A, 220 V, single phase 19.11 N.m for LXM26D at 12 A, 220 V, single phase |
| Rotor inertia | 4.28 kg.cm² |
Electrical
| Parameter | Value |
|---|---|
| Rated supply voltage (Us) | 220 V |
| Network phases | 1 |
| Maximum current (Irms) | 32.3 A for LXM28... at 2 kW, 220 V |
| Continuous stall current | 9.87 A |
| Maximum permanent current | 10.27 A |
| Torque constant | 0.65 N.m/A at 20 °C |
| Back-EMF constant | 39 V/krpm at 20 °C |
| Number of motor poles | 5.0 |
| Stator resistance | 0.36 Ohm at 20 °C |
| Stator inductance | 2.59 mH at 20 °C |
| Stator electrical time constant | 7.19 ms at 20 °C |
| Electrical connection | Connector MIL |
Feedback
| Parameter | Value |
|---|---|
| Feedback type | 20 bits multi turn absolute encoder |
Mechanical
| Parameter | Value |
|---|---|
| Shaft end style | Keyed |
| Shaft diameter | 22 mm |
| Shaft length | 45 mm |
| Key width | 8 mm |
| Motor flange size | 100 mm |
| Mounting support | Asian standard flange |
| Length | 198.5 mm |
| Number of mounting holes | 4 |
| Mounting-hole diameter | 9.2 mm |
| Mounting-hole bolt circle diameter | 115 mm |
| Centring collar diameter | 95 mm |
| Centring collar depth | 7 mm |
| Maximum radial force (Fr) | 570 N at 3000 rpm |
| Maximum axial force (Fa) | 200 N |
Environmental
| Parameter | Value |
|---|---|
| IP degree of protection | IP50 IM V3 IP65 IM B5, IM V1 |
| Cooling method | Natural convection |
| Winding (copper hot) temperature | 135 °C |
MPN
BCH2LH2033MA6C