Schneider Electric BCH2MM2023MA6C
MPNBCH2MM2023MA6C
Active
servo motor BCH2, Lexium, 130mm, 2000W, with oil seal, with key, 20 bit MT encoder, straight connection
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jun 2026
Specifications
| Parameter | Value |
|---|---|
| Product type | Servo motor |
| Holding brake | Without |
| Parameter | Value |
|---|---|
| Nominal torque | 9.55 N.m for LXM26D at 12 A, 220 V, three phase 9.55 N.m for LXM28... at 12 A, 220 V, three phase |
| Nominal output power | 2000 W for LXM26D at 12 A, 220 V, three phase 2000 W for LXM28... at 12 A, 220 V, three phase |
| Continuous power | 2000 W |
| Nominal speed | 2000 rpm for LXM26D at 12 A, 220 V, three phase 2000 rpm for LXM28... at 12 A, 220 V, three phase |
| Maximum mechanical speed | 3000 rpm |
| Continuous stall torque | 9.55 N.m for LXM26D at 12 A, 220 V, three phase 9.55 N.m for LXM28 at 12 A, 220 V, three phase |
| Peak stall torque | 28.65 N.m for LXM26D at 12 A, 220 V, three phase 28.65 N.m for LXM28... at 12 A, 220 V, three phase |
| Rotor inertia | 13.5 kg.cm² |
| Parameter | Value |
|---|---|
| Rated supply voltage (Us) | 220 V |
| Network phases | 3 |
| Maximum current (Irms) | 32.85 A for LXM26D at 2 kW, 220 V 32.85 A for LXM28... at 2 kW, 220 V |
| Continuous stall current | 9.95 A |
| Maximum permanent current | 11.25 A |
| Torque constant | 0.96 N.m/A at 20 °C |
| Back-EMF constant | 58 V/krpm at 20 °C |
| Number of motor poles | 5.0 |
| Stator resistance | 0.34 Ohm at 20 °C |
| Stator inductance | 4.3 mH at 20 °C |
| Stator electrical time constant | 13.24 ms at 20 °C |
| Electrical connection | Connector MIL |
| Parameter | Value |
|---|---|
| Feedback type | 20 bits multi turn absolute encoder |
| Parameter | Value |
|---|---|
| Shaft end style | Keyed |
| Shaft diameter | 22 mm |
| Shaft length | 55 mm |
| Key width | 8 mm |
| Motor flange size | 130 mm |
| Mounting support | Asian standard flange |
| Length | 187 mm |
| Number of mounting holes | 4 |
| Mounting-hole diameter | 9.2 mm |
| Mounting-hole bolt circle diameter | 145 mm |
| Centring collar diameter | 110 mm |
| Centring collar depth | 8 mm |
| Maximum radial force (Fr) | 670 N at 2000 rpm |
| Maximum axial force (Fa) | 200 N |
| Parameter | Value |
|---|---|
| IP degree of protection | IP50 IM V3 IP65 IM B5, IM V1 |
| Cooling method | Natural convection |
| Winding (copper hot) temperature | 135 °C |
MPN
BCH2MM2023MA6C