Schneider Electric BCH2MR3013MA6C
MPNBCH2MR3013MA6C
Active
servo motor BCH2, Lexium, 180mm, 3000W, with oil seal, with key, 20 bit MT encoder, straight connection
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jun 2026
Specifications
| Parameter | Value |
|---|---|
| Product type | Servo motor |
| Holding brake | Without |
| Parameter | Value |
|---|---|
| Nominal torque | 19.1 N.m for LXM26D at 19.8 A, 220 V, three phase 19.1 N.m for LXM28... at 19.8 A, 220 V, three phase |
| Nominal output power | 3000 W for LXM26D at 19.8 A, 220 V, three phase 3000 W for LXM28... at 19.8 A, 220 V, three phase |
| Continuous power | 3000 W |
| Nominal speed | 1500 rpm for LXM26D at 19.8 A, 220 V, three phase 1500 rpm for LXM28... at 19.8 A, 220 V, three phase |
| Maximum mechanical speed | 3000 rpm |
| Continuous stall torque | 19.1 N.m for LXM26D at 19.8 A, 220 V, three phase 19.1 N.m for LXM28 at 19.8 A, 220 V, three phase |
| Peak stall torque | 57.29 N.m for LXM26D at 19.8 A, 220 V, three phase 57.29 N.m for LXM28... at 19.8 A, 220 V, three phase |
| Rotor inertia | 53.56 kg.cm² |
| Parameter | Value |
|---|---|
| Rated supply voltage (Us) | 220 V |
| Network phases | 3 |
| Maximum current (Irms) | 58.4 A for LXM26D at 3 kW, 220 V 58.4 A for LXM28... at 3 kW, 220 V |
| Continuous stall current | 16.49 A |
| Maximum permanent current | 18.8 A |
| Torque constant | 1.16 N.m/A at 20 °C |
| Back-EMF constant | 70 V/krpm at 20 °C |
| Number of motor poles | 5.0 |
| Stator resistance | 0.234 Ohm at 20 °C |
| Stator inductance | 3.45 mH at 20 °C |
| Stator electrical time constant | 20.94 ms at 20 °C |
| Electrical connection | Connector MIL |
| Parameter | Value |
|---|---|
| Feedback type | 20 bits multi turn absolute encoder |
| Parameter | Value |
|---|---|
| Shaft end style | Keyed |
| Shaft diameter | 35 mm |
| Shaft length | 79 mm |
| Key width | 10 mm |
| Motor flange size | 180 mm |
| Mounting support | Asian standard flange |
| Length | 202 mm |
| Number of mounting holes | 4 |
| Mounting-hole diameter | 13.5 mm |
| Mounting-hole bolt circle diameter | 200 mm |
| Centring collar diameter | 114.3 mm |
| Centring collar depth | 4 mm |
| Maximum radial force (Fr) | 1200 N at 1500 rpm |
| Maximum axial force (Fa) | 497 N |
| Parameter | Value |
|---|---|
| IP degree of protection | IP50 IM V3 IP65 IM B5, IM V1 |
| Cooling method | Natural convection |
| Winding (copper hot) temperature | 135 °C |
MPN
BCH2MR3013MA6C