Schneider Electric BCH2MR3523MA6C
MPNBCH2MR3523MA6C
Active
servo motor BCH2, Lexium, 180mm, 3500W, with oil seal, with key, 20 bit MT encoder, straight connection
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jun 2026
Specifications
| Parameter | Value |
|---|---|
| Product type | Servo motor |
| Holding brake | Without |
| Parameter | Value |
|---|---|
| Nominal torque | 16.7 N.m for LXM26D at 22.9 A, 220 V, three phase 16.7 N.m for LXM28... at 22.9 A, 220 V, three phase |
| Nominal output power | 3500 W for LXM26D at 22.9 A, 220 V, three phase 3500 W for LXM28... at 22.9 A, 220 V, three phase |
| Continuous power | 3500 W |
| Nominal speed | 2000 rpm for LXM26D at 22.9 A, 220 V, three phase 2000 rpm for LXM28... at 22.9 A, 220 V, three phase |
| Maximum mechanical speed | 3000 rpm |
| Continuous stall torque | 16.7 N.m for LXM26D at 22.9 A, 220 V, three phase 16.7 N.m for LXM28 at 22.9 A, 220 V, three phase |
| Peak stall torque | 50.3 N.m for LXM26D at 22.9 A, 220 V, three phase 50.3 N.m for LXM28... at 22.9 A, 220 V, three phase |
| Rotor inertia | 53.56 kg.cm² |
| Parameter | Value |
|---|---|
| Rated supply voltage (Us) | 220 V |
| Network phases | 3 |
| Maximum current (Irms) | 57.8 A for LXM26D at 3.5 kW, 220 V 57.8 A for LXM28... at 3.5 kW, 220 V |
| Continuous stall current | 16.55 A |
| Maximum permanent current | 19 A |
| Torque constant | 1.01 N.m/A at 20 °C |
| Back-EMF constant | 61 V/krpm at 20 °C |
| Number of motor poles | 5.0 |
| Stator resistance | 0.157 Ohm at 20 °C |
| Stator inductance | 2.57 mH at 20 °C |
| Stator electrical time constant | 18.66 ms at 20 °C |
| Electrical connection | Connector MIL |
| Parameter | Value |
|---|---|
| Feedback type | 20 bits multi turn absolute encoder |
| Parameter | Value |
|---|---|
| Shaft end style | Keyed |
| Shaft diameter | 35 mm |
| Shaft length | 79 mm |
| Key width | 10 mm |
| Motor flange size | 180 mm |
| Mounting support | Asian standard flange |
| Length | 202 mm |
| Number of mounting holes | 4 |
| Mounting-hole diameter | 13.5 mm |
| Mounting-hole bolt circle diameter | 200 mm |
| Centring collar diameter | 114.3 mm |
| Centring collar depth | 4 mm |
| Maximum radial force (Fr) | 1200 N at 2000 rpm |
| Maximum axial force (Fa) | 497 N |
| Parameter | Value |
|---|---|
| IP degree of protection | IP50 IM V3 IP65 IM B5, IM V1 |
| Cooling method | Natural convection |
| Winding (copper hot) temperature | 135 °C |
MPN
BCH2MR3523MA6C