Schneider Electric BMH0701T21F1A
MPNBMH0701T21F1A
Obsolete
servo motor BMH, Lexium 32, 1.4Nm, 8000rpm, untapped shaft, with brake, IP65, IP67, 128bit encoder, straight
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
Specifications
| Parameter | Value |
|---|---|
| Product type | Servo motor |
| Holding brake | With |
| Parameter | Value |
|---|---|
| Nominal torque | 9.7 lbf.in (1.1 N.m) LXM32.U90M2 3 A, 230 V, single phase 11.95 lbf.in (1.35 N.m) LXM32.D18M2 6 A, 115 V, single phase |
| Nominal output power | 450 W LXM32.U90M2 3 A, 230 V, single phase 350 W LXM32.D18M2 6 A, 115 V, single phase |
| Continuous power | 1.05 W |
| Nominal speed | 4000 rpm LXM32.U90M2 3 A, 230 V, single phase 2500 rpm LXM32.D18M2 6 A, 115 V, single phase |
| Maximum mechanical speed | 8000 rpm |
| Continuous stall torque | 12.4 lbf.in (1.4 N.m) LXM32.U90M2 3 A, 230 V, single phase 12.4 lbf.in (1.4 N.m) LXM32.D18M2 6 A, 115 V, single phase |
| Peak stall torque | 35.4 lbf.in (4 N.m) LXM32.U90M2 3 A, 230 V, single phase 37.2 lbf.in (4.2 N.m) LXM32.D18M2 6 A, 115 V, single phase |
| Holding brake torque | 26.6 lbf.in (3 N.m) holding brake |
| Rotor inertia | 0.7 kg.cm² |
| Parameter | Value |
|---|---|
| Rated supply voltage (Us) | 240 V |
| Network phases | 3 |
| Phase | Three phase |
| Maximum current (Irms) | 9.6 A LXM32.D18M2 9.6 A LXM32.U90M2 |
| Continuous stall current | 2.85 A |
| Maximum permanent current | 9.56 A |
| Torque constant | 0.49 N.m/A 248 °F (120 °C) |
| Back-EMF constant | 31.17 V/krpm 248 °F (120 °C) |
| Number of motor poles | 10 |
| Stator resistance | 3.2 Ohm 68 °F (20 °C) |
| Stator inductance | 9.1 mH 68 °F (20 °C) |
| Stator electrical time constant | 2.8 ms 68 °F (20 °C) |
| Electrical connection | Straight connectors |
| Parameter | Value |
|---|---|
| Feedback type | Single turn SinCos Hiperface |
| Speed feedback resolution | 131072 points/turn |
| Parameter | Value |
|---|---|
| Shaft end style | Smooth shaft |
| Shaft diameter | 0.4 in (11 mm) |
| Shaft length | 0.9 in (23 mm) |
| Second shaft end | Without second shaft end |
| Motor flange size | 2.8 in (70 mm) |
| Mounting support | International standard flange |
| Length | 6.3 in (161 mm) |
| Number of mounting holes | 4 |
| Mounting-hole diameter | 0.2 in (5.5 mm) |
| Mounting-hole bolt circle diameter | 3.2 in (82 mm) |
| Centring collar diameter | 2.4 in (60 mm) |
| Centring collar depth | 0.10 in (2.5 mm) |
| Maximum radial force (Fr) | 660 N 1000 rpm 520 N 2000 rpm 460 N 3000 rpm 410 N 4000 rpm 380 N 5000 rpm 360 N 6000 rpm |
| Maximum axial force (Fa) | 0.2 x Fr |
| Parameter | Value |
|---|---|
| IP degree of protection | IP65 standard IP67 with IP67 kit |
| Cooling method | Natural convection |
| Winding (copper hot) temperature | 275 °F (135 °C) |
MPN
BMH0701T21F1A