Schneider Electric BMH0702T36F1A
MPNBMH0702T36F1A
Obsolete
servo motor BMH, Lexium 32, 2.5Nm, 8000rpm, keyed shaft, with brake, IP65, IP67, 16bit encoder, straight
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
Specifications
| Parameter | Value |
|---|---|
| Product type | Servo motor |
| Holding brake | With |
| Parameter | Value |
|---|---|
| Nominal torque | 20.4 lbf.in (2.3 N.m) LXM32.D30M2 10 A, 115 V, single phase 18.6 lbf.in (2.1 N.m) LXM32.D18M2 6 A, 230 V, single phase |
| Nominal output power | 600 W LXM32.D30M2 10 A, 115 V, single phase 900 W LXM32.D18M2 6 A, 230 V, single phase |
| Continuous power | 1.51 W |
| Nominal speed | 2500 rpm LXM32.D30M2 10 A, 115 V, single phase 4000 rpm LXM32.D18M2 6 A, 230 V, single phase |
| Maximum mechanical speed | 8000 rpm |
| Continuous stall torque | 22.1 lbf.in (2.5 N.m) LXM32.D30M2 10 A, 115 V, single phase 22.1 lbf.in (2.5 N.m) LXM32.D18M2 6 A, 230 V, single phase |
| Peak stall torque | 56.6 lbf.in (6.4 N.m) LXM32.D30M2 10 A, 115 V, single phase 65.5 lbf.in (7.4 N.m) LXM32.D18M2 6 A, 230 V, single phase |
| Holding brake torque | 26.6 lbf.in (3 N.m) holding brake |
| Rotor inertia | 1.24 kg.cm² |
| Parameter | Value |
|---|---|
| Rated supply voltage (Us) | 240 V |
| Network phases | 3 |
| Phase | Three phase |
| Maximum current (Irms) | 15 A LXM32.D30M2 17.5 A LXM32.D18M2 |
| Continuous stall current | 5.38 A |
| Maximum permanent current | 17.71 A |
| Torque constant | 0.46 N.m/A 248 °F (120 °C) |
| Back-EMF constant | 29.6 V/krpm 248 °F (120 °C) |
| Number of motor poles | 10 |
| Stator resistance | 1.15 Ohm 68 °F (20 °C) |
| Stator inductance | 3.6 mH 68 °F (20 °C) |
| Stator electrical time constant | 3.1 ms 68 °F (20 °C) |
| Electrical connection | Straight connectors |
| Parameter | Value |
|---|---|
| Feedback type | Single turn SinCos Hiperface |
| Speed feedback resolution | 32768 points/turn |
| Parameter | Value |
|---|---|
| Shaft end style | Keyed |
| Shaft diameter | 0.4 in (11 mm) |
| Shaft length | 0.9 in (23 mm) |
| Second shaft end | Without second shaft end |
| Key width | 0.7 in (18 mm) |
| Motor flange size | 2.8 in (70 mm) |
| Mounting support | International standard flange |
| Length | 7.6 in (193 mm) |
| Number of mounting holes | 4 |
| Mounting-hole diameter | 0.2 in (5.5 mm) |
| Mounting-hole bolt circle diameter | 3.2 in (82 mm) |
| Centring collar diameter | 2.4 in (60 mm) |
| Centring collar depth | 0.10 in (2.5 mm) |
| Maximum radial force (Fr) | 710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm |
| Maximum axial force (Fa) | 0.2 x Fr |
| Parameter | Value |
|---|---|
| IP degree of protection | IP65 standard IP67 with IP67 kit |
| Cooling method | Natural convection |
| Winding (copper hot) temperature | 275 °F (135 °C) |
MPN
BMH0702T36F1A