Schneider Electric BMH0703P36A1A
MPNBMH0703P36A1A
Obsolete
servo motor BMH, Lexium 32, 3.4Nm, 8000rpm, keyed shaft, without brake, IP65, IP67, 16bit encoder, straight, 3 phases
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsListing updated Jun 2026
Specifications
Identification
| Parameter | Value |
|---|---|
| Product type | Servo motor |
| Holding brake | Without |
Performance
| Parameter | Value |
|---|---|
| Nominal torque | 21.2 lbf.in (2.4 N.m) LXM32.D18N4 6 A, 400 V, three phase 21.2 lbf.in (2.4 N.m) LXM32.D18N4 6 A, 480 V, three phase |
| Nominal output power | 1300 W LXM32.D18N4 6 A, 400 V, three phase 1300 W LXM32.D18N4 6 A, 480 V, three phase |
| Continuous power | 1.68 W |
| Nominal speed | 5000 rpm LXM32.D18N4 6 A, 400 V, three phase 5000 rpm LXM32.D18N4 6 A, 480 V, three phase |
| Maximum mechanical speed | 8000 rpm |
| Continuous stall torque | 30.09 lbf.in (3.4 N.m) LXM32.D18N4 6 A, 400 V, three phase 30.09 lbf.in (3.4 N.m) LXM32.D18N4 6 A, 480 V, three phase |
| Peak stall torque | 90.3 lbf.in (10.2 N.m) LXM32.D18N4 6 A, 400 V, three phase 90.3 lbf.in (10.2 N.m) LXM32.D18N4 6 A, 480 V, three phase |
| Rotor inertia | 1.67 kg.cm² |
Electrical
| Parameter | Value |
|---|---|
| Rated supply voltage (Us) | 480 V |
| Network phases | 3 |
| Phase | Three phase |
| Maximum current (Irms) | 12.6 A LXM32.D18N4 |
| Continuous stall current | 3.91 A |
| Maximum permanent current | 12.57 A |
| Torque constant | 0.87 N.m/A 248 °F (120 °C) |
| Back-EMF constant | 55.8 V/krpm 248 °F (120 °C) |
| Number of motor poles | 10 |
| Stator resistance | 2.65 Ohm 68 °F (20 °C) |
| Stator inductance | 8.6 mH 68 °F (20 °C) |
| Stator electrical time constant | 3.2 ms 68 °F (20 °C) |
| Electrical connection | Straight connectors |
Feedback
| Parameter | Value |
|---|---|
| Feedback type | Single turn SinCos Hiperface |
| Speed feedback resolution | 32768 points/turn |
Mechanical
| Parameter | Value |
|---|---|
| Shaft end style | Keyed |
| Shaft diameter | 0.6 in (14 mm) |
| Shaft length | 1.2 in (30 mm) |
| Second shaft end | Without second shaft end |
| Key width | 0.8 in (20 mm) |
| Motor flange size | 2.8 in (70 mm) |
| Mounting support | International standard flange |
| Length | 7.3 in (186 mm) |
| Number of mounting holes | 4 |
| Mounting-hole diameter | 0.2 in (5.5 mm) |
| Mounting-hole bolt circle diameter | 3.2 in (82 mm) |
| Centring collar diameter | 2.4 in (60 mm) |
| Centring collar depth | 0.10 in (2.5 mm) |
| Maximum radial force (Fr) | 730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm |
| Maximum axial force (Fa) | 0.2 x Fr |
Environmental
| Parameter | Value |
|---|---|
| IP degree of protection | IP65 standard IP67 with IP67 kit |
| Cooling method | Natural convection |
| Winding (copper hot) temperature | 275 °F (135 °C) |
MPN
BMH0703P36A1A