Schneider Electric BMH1401P22A1A
MPNBMH1401P22A1A
Active
servo motor BMH, Lexium 32, 10.3Nm, 4000rpm, untapped shaft, without brake, IP65, IP67, 128 multiturn encoder, straight
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jun 2026
Specifications
| Parameter | Value |
|---|---|
| Product type | Servo motor |
| Holding brake | Without |
| Parameter | Value |
|---|---|
| Nominal torque | 61.07 lbf.in (6.9 N.m) LXM32.D30M2 10 A, 230 V, single phase 68.2 lbf.in (7.7 N.m) LXM32.D30N4 10 A, 400 V, three phase 68.2 lbf.in (7.7 N.m) LXM32.D30N4 10 A, 480 V, three phase |
| Nominal output power | 1450 W LXM32.D30M2 10 A, 230 V, single phase 2400 W LXM32.D30N4 10 A, 400 V, three phase 2400 W LXM32.D30N4 10 A, 480 V, three phase |
| Continuous power | 2.85 W |
| Nominal speed | 2000 rpm LXM32.D30M2 10 A, 230 V, single phase 3000 rpm LXM32.D30N4 10 A, 400 V, three phase 3000 rpm LXM32.D30N4 10 A, 480 V, three phase |
| Maximum mechanical speed | 4000 rpm |
| Continuous stall torque | 91.2 lbf.in (10.3 N.m) LXM32.D30M2 10 A, 230 V, single phase 91.2 lbf.in (10.3 N.m) LXM32.D30N4 10 A, 400 V, three phase 91.2 lbf.in (10.3 N.m) LXM32.D30N4 10 A, 480 V, three phase |
| Peak stall torque | 272.6 lbf.in (30.8 N.m) LXM32.D30M2 10 A, 230 V, single phase 272.6 lbf.in (30.8 N.m) LXM32.D30N4 10 A, 400 V, three phase 272.6 lbf.in (30.8 N.m) LXM32.D30N4 10 A, 480 V, three phase |
| Rotor inertia | 16.46 kg.cm² |
| Parameter | Value |
|---|---|
| Rated supply voltage (Us) | 480 V |
| Network phases | 3 |
| Phase | Three phase |
| Maximum current (Irms) | 29.8 A LXM32.D30M2 29.8 A LXM32.D30N4 |
| Continuous stall current | 8.58 A |
| Maximum permanent current | 29.8 A |
| Torque constant | 1.16 N.m/A 248 °F (120 °C) |
| Back-EMF constant | 77.4 V/krpm 248 °F (120 °C) |
| Number of motor poles | 5.0 |
| Stator resistance | 0.69 Ohm 68 °F (20 °C) |
| Stator inductance | 4.66 mH 68 °F (20 °C) |
| Stator electrical time constant | 9.7 ms 68 °F (20 °C) |
| Electrical connection | Straight connectors |
| Parameter | Value |
|---|---|
| Feedback type | Multiturn SinCos Hiperface |
| Speed feedback resolution | 131072 points/turn x 4096 turns |
| Parameter | Value |
|---|---|
| Shaft end style | Smooth shaft |
| Shaft diameter | 0.9 in (24 mm) |
| Shaft length | 2.0 in (50 mm) |
| Second shaft end | Without second shaft end |
| Motor flange size | 5.5 in (140 mm) |
| Mounting support | International standard flange |
| Length | 6.0 in (152 mm) |
| Number of mounting holes | 4 |
| Mounting-hole diameter | 0.4 in (11 mm) |
| Mounting-hole bolt circle diameter | 6.5 in (165 mm) |
| Centring collar diameter | 5.1 in (130 mm) |
| Centring collar depth | 0.1 in (3.5 mm) |
| Maximum radial force (Fr) | 1930 N 1000 rpm 1530 N 2000 rpm 1340 N 3000 rpm |
| Maximum axial force (Fa) | 0.2 x Fr |
| Parameter | Value |
|---|---|
| IP degree of protection | IP65 standard IP67 with IP67 kit |
| Cooling method | Natural convection |
| Winding (copper hot) temperature | 275 °F (135 °C) |
MPN
BMH1401P22A1A