Schneider Electric BMH1402P06F1A
MPNBMH1402P06F1A
Obsolete
servo motor BMH, Lexium 32, 18.5Nm, 4000rpm, untapped shaft, with brake, IP54, 16bit encoder, straight
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
Specifications
| Parameter | Value |
|---|---|
| Product type | Servo motor |
| Holding brake | With |
| Parameter | Value |
|---|---|
| Nominal torque | 108.0 lbf.in (12.2 N.m) LXM32.D72N4 24 A, 400 V, three phase 108.0 lbf.in (12.2 N.m) LXM32.D72N4 24 A, 480 V, three phase |
| Nominal output power | 3500 W LXM32.D72N4 24 A, 400 V, three phase 3500 W LXM32.D72N4 24 A, 480 V, three phase |
| Continuous power | 4.44 W |
| Nominal speed | 3000 rpm LXM32.D72N4 24 A, 400 V, three phase 3000 rpm LXM32.D72N4 24 A, 480 V, three phase |
| Maximum mechanical speed | 4000 rpm |
| Continuous stall torque | 163.7 lbf.in (18.5 N.m) LXM32.D72N4 24 A, 400 V, three phase 163.7 lbf.in (18.5 N.m) LXM32.D72N4 24 A, 480 V, three phase |
| Peak stall torque | 445.2 lbf.in (50.3 N.m) LXM32.D72N4 24 A, 400 V, three phase 445.2 lbf.in (50.3 N.m) LXM32.D72N4 24 A, 480 V, three phase |
| Holding brake torque | 159.3 lbf.in (18 N.m) holding brake |
| Rotor inertia | 33.5 kg.cm² |
| Parameter | Value |
|---|---|
| Rated supply voltage (Us) | 480 V |
| Network phases | 3 |
| Phase | Three phase |
| Maximum current (Irms) | 57.4 A LXM32.D72N4 |
| Continuous stall current | 16.83 A |
| Maximum permanent current | 57.4 A |
| Torque constant | 1.1 N.m/A 248 °F (120 °C) |
| Back-EMF constant | 70.7 V/krpm 248 °F (120 °C) |
| Number of motor poles | 10 |
| Stator resistance | 0.23 Ohm 68 °F (20 °C) |
| Stator inductance | 3 mH 68 °F (20 °C) |
| Stator electrical time constant | 13 ms 68 °F (20 °C) |
| Electrical connection | Straight connectors |
| Parameter | Value |
|---|---|
| Feedback type | Single turn SinCos Hiperface |
| Speed feedback resolution | 32768 points/turn |
| Parameter | Value |
|---|---|
| Shaft end style | Smooth shaft |
| Shaft diameter | 0.9 in (24 mm) |
| Shaft length | 2.0 in (50 mm) |
| Second shaft end | Without second shaft end |
| Motor flange size | 5.5 in (140 mm) |
| Mounting support | International standard flange |
| Length | 8.9 in (227 mm) |
| Number of mounting holes | 4 |
| Mounting-hole diameter | 0.4 in (11 mm) |
| Mounting-hole bolt circle diameter | 6.5 in (165 mm) |
| Centring collar diameter | 5.1 in (130 mm) |
| Centring collar depth | 0.1 in (3.5 mm) |
| Maximum radial force (Fr) | 2240 N 1000 rpm 1780 N 2000 rpm 1550 N 3000 rpm |
| Maximum axial force (Fa) | 0.2 x Fr |
| Parameter | Value |
|---|---|
| IP degree of protection | IP54 standard |
| Cooling method | Natural convection |
| Winding (copper hot) temperature | 275 °F (135 °C) |
MPN
BMH1402P06F1A