Skip to main content
Log in
Schneider Electric BMI0702P32F

BMI0702P32F Servo Motor, 400-900W, IP65

MPNBMI0702P32F
Obsolete

BMI0702P32F three-phase servo motor from the BMI series, delivering 400 to 900 W output depending on line voltage (208–480 V). Includes an integrated holding brake, keyed shaft, and absolute multiturn SinCos Hiperface feedback.

$2,910.00Ref. price · indicative, final on quote
Schneider Electric BMI0702P32F datasheet (PDF)
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
How we verify every order →

Specifications

BMI0702P32F key specifications
ParameterValue
Feedback typeAbsolute multiturn SinCos Hiperface
Type of coolingNatural convection
Product or component typeServo motor with power stage
Supply voltage limits208...480 V
Supply voltage208...480 V - 15...10 %
Maximum current irms9.6 A 208 V, three phase 9.6 A 400 V, three phase 9.6 A 480 V, three phase
Output current 3s peak6 A 400 V 3 s
Continuous stall current2 A
Continuous output current2 A 8 kHz
Brake pull-in power5 W
Nominal output power400 W 208 V three phase 800 W 400 V three phase 900 W 480 V three phase
Supply frequency50/60 Hz - 5...5 %

All specifications

BMI0702P32F additional specifications
ParameterValue
Network frequency limits47.5...63 Hz
Number of motor poles10
PhasesThree phase
IP degree of protectionIP65
Mounting supportInternational standard flange
Mounting holes diameter0.2 in (5.5 mm)
Number of mounting holes4
Circle diameter of the mounting holes3.0...3.2 in (75...82 mm)
Electrical connectionPrinted circuit board connector
EMC filterIntegrated
Key width0.2 in (4 mm)
Centring collar depth0.10 in (2.5 mm)
Length12.05 in (306 mm)
CategoryUS1PC5618287
Shaft endKeyed
Second shaftWithout second shaft end
Shaft length0.9 in (23 mm)
Holding brakeWith
Nominal speed1800 rpm 208 V three phase 3600 rpm 400 V three phase 4400 rpm 480 V three phase
Rotor inertia1.24 kg.cm²
Holding torque26.6 lbf.in (3 N.m) holding brake
Nominal torque21.2 lbf.in (2.4 N.m) 208 V three phase 19.5 lbf.in (2.2 N.m) 400 V three phase 17.7 lbf.in (2 N.m) 480 V three phase
Shaft diameter0.4 in (11 mm)
Torque constant1.15 N.m/A 68 °F (20 °C)
Back emf constant77.18 V/krpm 68 °F (20 °C)
Device short nameBMI
Motor flange size2.8 in (70 mm)
Peak stall torque60.2 lbf.in (6.8 N.m) 208 V three phase 60.2 lbf.in (6.8 N.m) 400 V three phase 60.2 lbf.in (6.8 N.m) 480 V three phase
Stator inductance25.75 mH 68 °F (20 °C)
Stator resistance8.89 Ohm 68 °F (20 °C)
Maximum axial force fa0.2 x Fr
Number of motor stacks2
Continuous stall torque21.95 lbf.in (2.48 N.m) 208...480 V three phase
Maximum radial force fr710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm
Centring collar diameter2.4 in (60 mm)
Maximum mechanical speed8000 rpm
Speed feedback resolution131072 points/turn x 4096 turns
Distance shaft shoulder-flange0.10 in (2.5 mm)
Stator electrical time constant2.9 ms 68 °F (20 °C)

Product details

Motor specs at a glance

The BMI0702P32F: Three-phase servo motor for the BMI series. Output power depends on the supply voltage: 400 W at 208 V, 800 W at 400 V, and 900 W at 480 V – so you can standardize on one motor frame across 50/60 Hz regions without re-engineering the mechanical mount. Rated speed varies with voltage too: 1800 rpm at 208 V, 3600 rpm at 400 V, 4400 rpm at 480 V. Ten poles, natural convection cooling, IP65 enclosure – ready for washdown or dusty environments. Integrated EMC filter saves a panel component and simplifies compliance. The holding brake (pull-in power 5 W) holds 3 N·m, enough for vertical-axis loads in packaging or material handling.

Feedback and control setup

Absolute multiturn SinCos Hiperface feedback – means no homing routine after a power loss; the drive knows the shaft position from where it left off. For a motion system that needs repeatable positioning without a home sensor, this saves a limit switch and a fieldbus cycle. Electrical connection via printed circuit board connector; shaft is keyed (0.2 in key width, 0.9 in shaft length, 0.4 in diameter). Centring collar depth 2.5 mm, flange size 70 mm – fits common international standard flanges.

What the techs need: a standard frame, a built-in brake and EMC filter, and feedback that knocks out the home routine. Within budget for a motor that simplifies the panel and the wiring.

MPN
BMI0702P32F