Quick ID
This BMI1002P26A is a three-phase servo motor in the BMI series, built on a 100 mm flange. It's a current-production item, so no end-of-life worry on a new BOM item. At a 400 V three-phase supply, it delivers 5.1 N.m continuous stall torque and peaks at 14 N.m. Supply range is 208 V to 480 V, three-phase. The absolute single-turn SinCos Hiperface feedback gives position hold without homing – good for pick-and-place or rotary indexing applications. IP65 means it's sealed against washdown, and the integrated EMC filter saves panel space on the drive connection.
Mounts to an international standard flange 100 mm (3.9 in) with four 9 mm holes on a 95 mm centring collar. No second shaft and no holding brake – keep that in mind if you need a brake on the same frame. The printed circuit board connector (PCB header) handles the power and feedback wiring; plan for a mating connector block on your panel. Shaft is untapped, 19 mm diameter, 40 mm length. Continuous stall current is 4 A, maximum continuous current 17.5 A RMS. Stator resistance 2.347 Ω, inductance 9.79 mH at 20 °C.