Skip to main content
Log in
Schneider Electric BMXDDO1602H

BMXDDO1602H Modicon X80 16DO Solid State 24V DC

MPNBMXDDO1602H
Active

Schneider Electric Modicon X80 discrete output module, 16 solid-state outputs, 24V DC positive, 0.5 A per channel, conformal coated for severe environments.

$399.00 – $555.47Ref. price · indicative, final on quote
Schneider Electric BMXDDO1602H datasheet (PDF)
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
How we verify every order →

Specifications

BMXDDO1602H key specifications
ParameterValue
Protection typeExternal fuse reverse polarity protection short-circuit protection overload protection overvoltage protection
Range of productModicon X80
Discrete output typeSolid state
Product or component typeDiscrete output module
Maximum voltage drop10 MOhm 500 V DC
Discrete output voltage24 V 19...30 V DC
Voltage detection threshold< 14 V DC preactuator fault > 18 V DC preactuator at state 0
Current per channel0.625 A
Discrete output current0.5 A
Maximum leakage current0.5 mA at state 0
Maximum current per module10 A
Typical current consumption79 mA at 3.3 V DC

All specifications

BMXDDO1602H additional specifications
ParameterValue
Output short-circuit protectionWith 2 A external fuse
Power dissipation in4 W
Switching frequency0.5/LI² Hz
IP degree of protectionIP20
Response time on output1.2 ms
Shock resistance30 gn
Relative humidity5...95 % at 55 °C without condensation
Operating altitude0...2000 m 2000...5000 m with derating factor
Vibration resistance3 gn
MTBF reliability410000 H
Directives2014/35/EU - low voltage directive 2014/30/EU - electromagnetic compatibility
Status LED1 LED (green) module operating (RUN) 1 LED per channel (green) channel diagnostic 1 LED (red) module error (ERR) 1 LED (red) module I/O
Dielectric strength1500 V AC at 50/60 Hz 1 minute, output/ground 1500 V AC at 50/60 Hz 1 minute, output/internal logic
Load impedance ohmic> 48 Ohm
Protective treatmentConformal coating
Discrete output logicPositive
Maximum tungsten load6 W
Discrete output number16 conforming to IEC 61131-2
Paralleling of outputsYes : 2 maximum
Output overload protectionWith electronic circuit breaker 1.5 In < Id < 2 In With current limiter
Reverse polarity protectionReverse mounted diode
Environmental characteristicGas resistant class Gx Gas resistant class 3C4 Dust resistant class 3S4 Sand resistant class 3S4 Salt resistant level 2 Mold growth resistant class 3B2 Fungal spore resistant class 3B2
Product specific applicationFor severe environments
Output overvoltage protectionWith transil diode
Ambient air temperature for storage-40...85 °C
Ambient air temperature for operation-25...70 °C

Product details

The Schneider Electric BMXDDO1602H is a 16-point solid-state output module for the Modicon X80 platform, delivering 24 V DC positive logic at 0.5 A per channel with a module total of 10 A. It is built for severe environments with conformal coating and a wide operating temperature range from -25 to 70 °C. Each output is protected against short circuit (via a 2 A external fuse), overload (with an electronic circuit breaker), overvoltage (via transil diode), and reverse polarity (via diode). Response time is 1.2 ms, and dielectric strength between output and ground is 1500 V AC for one minute. LED diagnostics give instant status: a green RUN LED, a red ERR LED for module error, a red I/O LED, and a green LED per channel for channel diagnostic.

Lifecycle and spares posture

For existing Modicon X80 installations, this module is a direct drop-in replacement for 16-point positive-logic output slots. No last-time-buy or obsolescence watch required today.

Installation and commissioning notes

The module draws 79 mA from the 3.3 V DC backplane. It occupies a single slot in an X80 rack and is rated IP20. Ensure the external 2 A fuse is fitted per channel for short-circuit protection; the module also provides overload and overvoltage protection internally. Outputs are positive logic (sourcing) and can be paralleled for higher current up to two channels maximum. Watch the load impedance: ohmic loads above 48 Ω are specified for the output stage.

Frequently asked questions

What directives does the BMXDDO1602H comply with?

It is designed to comply with 2014/35/EU low voltage directive and 2014/30/EU electromagnetic compatibility directive.

What do the status LEDs indicate?

One green LED indicates module operating (RUN), one red LED indicates module error (ERR), one red LED indicates module I/O error, and one green LED per channel indicates channel diagnostic.

MPN
BMXDDO1602H