Skip to main content
Log in
Schneider Electric BMXDDO3202H

Schneider BMXDDO3202H 32-Ch Solid State Output Module

MPNBMXDDO3202H
Active

Schneider Electric Modicon X80 series, BMXDDO3202H discrete output module, 32 outputs solid-state, 0.5 A per channel, 12...24 V DC, conformal coated, IP20.

$1,110.00Ref. price · indicative, final on quote
Schneider Electric BMXDDO3202H datasheet (PDF)
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
How we verify every order →

Specifications

BMXDDO3202H key specifications
ParameterValue
Protection typeExternal fuse reverse polarity protection short-circuit protection overload protection overvoltage protection
Range of productModicon X80
Discrete output typeSolid state
Product or component typeDiscrete output module
Maximum voltage drop10 MOhm 500 V DC
Discrete output voltage12...24 V 10.8...30 V DC
Voltage detection threshold< 14 V DC preactuator fault > 18 V DC preactuator at state 0
Current per channel0.55 A
Discrete output current0.5 A
Maximum leakage current0.1 mA at state 0
Maximum current per module17.6 A
Typical current consumption56 mA at 3.3 V DC

All specifications

BMXDDO3202H additional specifications
ParameterValue
Output short-circuit protectionWith external fuse
Power dissipation in4.8 W
Switching frequency0.5/LI² Hz
IP degree of protectionIP20
Response time on output0.3 ms
Shock resistance30 gn
Relative humidity5...95 % at 55 °C without condensation
Operating altitude0...2000 m 2000...5000 m with derating factor
Vibration resistance3 gn
MTBF reliability833000 H
Directives2014/35/EU - low voltage directive 2014/30/EU - electromagnetic compatibility
Status LED1 LED (green) module operating (RUN) 1 LED per channel (green) channel diagnostic 1 LED (red) module error (ERR) 1 LED (red) module I/O
Dielectric strength1780 V AC at 50/60 Hz 1 minute, output/ground 1 minute, output/internal logic
Load impedance ohmic> 54.54 Ohm
Protective treatmentConformal coating
Discrete output logicPositive
Maximum tungsten load6 W 24 V 3 W 12 V
Discrete output number32 conforming to IEC 61131-2
Paralleling of outputsYes : 3 maximum
Output overload protectionWith electronic circuit breaker 1.5 In < Id < 2 In With current limiter
Reverse polarity protectionReverse mounted diode
Environmental characteristicGas resistant class Gx Gas resistant class 3C4 Dust resistant class 3S4 Sand resistant class 3S4 Salt resistant level 2 Mold growth resistant class 3B2 Fungal spore resistant class 3B2
Product specific applicationFor severe environments
Output overvoltage protectionWith transil diode
Ambient air temperature for storage-40...85 °C
Ambient air temperature for operation-25...70 °C

Product details

The BMXDDO3202H is a 32-channel solid-state discrete output module in the Modicon X80 family. It switches positive-logic DC loads between 10.8 and 30 V, each channel rated 0.5 A, with a module total of 17.6 A.

Key ratings in context

Each output sinks 0.5 A continuous with a maximum voltage drop held under the 10 MOhm / 500 V DC test condition. Paralleling up to three channels expands current handling when needed. The electronic circuit breaker trips between 1.5 and 2 x In, and the transil diode clamps overvoltage – so the module can handle short bursts beyond rated current without letting smoke out. Switch-on response is 0.3 ms; leakage at state 0 stays under 0.1 mA. That makes it suitable for fast-acting solenoids or indicators where off-state dark current can't be tolerated. The module draws 56 mA from the 3.3 V backplane; total power dissipation inside the rack is 4.8 W, so it won't cook a crowded panel.

Environment and lifecycle

Conformal coating and multi-environmental resistance cover gas, dust, salt, and mold. Operates from -25 to 70 °C at 5-95% humidity. Complies with 2014/35/EU (Low Voltage) and 2014/30/EU (EMC) directives. Dielectric strength tested at 1780 V AC between output and ground.

Sourcing and fit confirmation

The BMXDDO3202H is available to order against an RFQ. For a current-production Modicon X80 module with these ratings, sourcing lead time is quoted individually based on your volume and preferred delivery window.

Frequently asked questions

What compliance documentation does this module carry?

It complies with the Low Voltage Directive 2014/35/EU and the EMC Directive 2014/30/EU. Dielectric strength is 1780 V AC output-to-ground. Additional environmental resistance ratings are documented for severe service.

What are the key electrical ratings?

32 outputs, solid-state, positive logic, 0.5 A per channel (0.55 A per channel under some conditions), 12-24 V DC (10.8-30 V range), module maximum 17.6 A. Response time 0.3 ms on, leakage <0.1 mA off.

Does the module include diagnostic LEDs?

Yes, one green RUN LED, one green LED per channel for channel diagnostics, one red ERR LED for module error, and one red I/O LED.

MPN
BMXDDO3202H