Schneider Electric BSH1403T12A2P
MPNBSH1403T12A2P
Obsolete
servo motor BSH, Lexium 32, 27.8N.m, 3000rpm, 140mm, keyed shaft, Sincos multi turn, without brake, IP50
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
Specifications
| Parameter | Value |
|---|---|
| Product type | Servo motor |
| Holding brake | Without |
| Parameter | Value |
|---|---|
| Nominal torque | 114.2 lbf.in (12.9 N.m) LXM32.D72N4 24 A, 400 V, three phase 114.2 lbf.in (12.9 N.m) LXM32.D72N4 24 A, 480 V, three phase |
| Nominal output power | 4100 W LXM32.D72N4 24 A, 400 V, three phase 4100 W LXM32.D72N4 24 A, 480 V, three phase |
| Nominal speed | 3000 rpm LXM32.D72N4 24 A, 400 V, three phase 3000 rpm LXM32.D72N4 24 A, 480 V, three phase |
| Maximum mechanical speed | 4800 rpm |
| Continuous stall torque | 246.05 lbf.in (27.8 N.m) LXM32.D72N4 24 A, 400 V, three phase 246.05 lbf.in (27.8 N.m) LXM32.D72N4 24 A, 480 V, three phase |
| Peak stall torque | 798.3 lbf.in (90.2 N.m) LXM32.D72N4 24 A, 400 V, three phase 798.3 lbf.in (90.2 N.m) LXM32.D72N4 24 A, 480 V, three phase |
| Rotor inertia | 12.68 kg.cm² |
| Parameter | Value |
|---|---|
| Network phases | 3 |
| Phase | Three phase |
| Maximum current (Irms) | 72 A LXM32.D72N4 |
| Continuous stall current | 22.3 A |
| Maximum permanent current | 81.3 A |
| Torque constant | 1.25 N.m/A 248 °F (120 °C) |
| Back-EMF constant | 105 V/krpm 248 °F (120 °C) |
| Stator resistance | 0.4 Ohm 68 °F (20 °C) |
| Stator inductance | 5.1 mH 68 °F (20 °C) |
| Stator electrical time constant | 12.75 ms 68 °F (20 °C) |
| Electrical connection | Rotatable right-angled connectors |
| Parameter | Value |
|---|---|
| Feedback type | Multiturn SinCos Hiperface |
| Speed feedback resolution | 131072 points/turn x 4096 turns |
| Parameter | Value |
|---|---|
| Shaft end style | Keyed |
| Shaft diameter | 0.9 in (24 mm) |
| Shaft length | 2.0 in (50 mm) |
| Second shaft end | Without second shaft end |
| Key width | 1.6 in (40 mm) |
| Motor flange size | 5.5 in (140 mm) |
| Mounting support | International standard |
| Length | 12.9 in (327.5 mm) |
| Number of mounting holes | 4 |
| Mounting-hole diameter | 0.4 in (11 mm) |
| Mounting-hole bolt circle diameter | 6.5 in (165 mm) |
| Centring collar diameter | 5.1 in (130 mm) |
| Centring collar depth | 0.1 in (3.5 mm) |
| Maximum radial force (Fr) | 1780 N 3000 rpm 2030 N 2000 rpm 2560 N 1000 rpm |
| Maximum axial force (Fa) | 0.2 x Fr |
| Parameter | Value |
|---|---|
| IP degree of protection | IP50 standard |
| Cooling method | Natural convection |
| Winding (copper hot) temperature | 248 °F (120 °C) |
MPN
BSH1403T12A2P