Skip to main content
Log in
Schneider Electric BSH1403T21A2P — Servo Motors with Brake

Schneider BSH1403T21A2P Lexium 32 servo motor, 27.8 N.m, 4800 rpm

MPNBSH1403T21A2P
Active

Schneider BSH1403T21A2P Lexium 32 Servo Drives & Motors.

$1,844.10Ref. price · indicative, final on quote
Schneider Electric BSH1403T21A2P datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jun 2026

Specifications

BSH1403T21A2P — Identification
ParameterValue
Product typeServo motor
Holding brakeWithout
BSH1403T21A2P — Performance
ParameterValue
Nominal torque114.2 lbf.in (12.9 N.m) LXM32.D72N4 24 A, 400 V, three phase 114.2 lbf.in (12.9 N.m) LXM32.D72N4 24 A, 480 V, three phase
Nominal output power4100 W LXM32.D72N4 24 A, 400 V, three phase 4100 W LXM32.D72N4 24 A, 480 V, three phase
Nominal speed3000 rpm LXM32.D72N4 24 A, 400 V, three phase 3000 rpm LXM32.D72N4 24 A, 480 V, three phase
Maximum mechanical speed4800 rpm
Continuous stall torque246.05 lbf.in (27.8 N.m) LXM32.D72N4 24 A, 400 V, three phase 246.05 lbf.in (27.8 N.m) LXM32.D72N4 24 A, 480 V, three phase
Peak stall torque798.3 lbf.in (90.2 N.m) LXM32.D72N4 24 A, 400 V, three phase 798.3 lbf.in (90.2 N.m) LXM32.D72N4 24 A, 480 V, three phase
Rotor inertia12.68 kg.cm²
BSH1403T21A2P — Electrical
ParameterValue
Network phases3
PhaseThree phase
Maximum current (Irms)72 A LXM32.D72N4
Continuous stall current22.3 A
Maximum permanent current81.3 A
Torque constant1.25 N.m/A 248 °F (120 °C)
Back-EMF constant105 V/krpm 248 °F (120 °C)
Number of motor poles5.0
Stator resistance0.4 Ohm 68 °F (20 °C)
Stator inductance1.35 mH 68 °F (20 °C)
Stator electrical time constant12.75 ms 68 °F (20 °C)
Electrical connectionRotatable right-angled connectors
BSH1403T21A2P — Feedback
ParameterValue
Feedback typeSingle turn SinCos Hiperface
Speed feedback resolution131072 points/turn
BSH1403T21A2P — Mechanical
ParameterValue
Shaft end styleUntapped
Shaft diameter0.9 in (24 mm)
Shaft length2.0 in (50 mm)
Second shaft endWithout second shaft end
Motor flange size5.5 in (140 mm)
Mounting supportInternational standard
Length12.9 in (327.5 mm)
Number of mounting holes4
Mounting-hole diameter0.4 in (11 mm)
Mounting-hole bolt circle diameter6.5 in (165 mm)
Centring collar diameter5.1 in (130 mm)
Centring collar depth0.1 in (3.5 mm)
Maximum radial force (Fr)1780 N 3000 rpm 2030 N 2000 rpm 2560 N 1000 rpm
Maximum axial force (Fa)0.2 x Fr
BSH1403T21A2P — Environmental
ParameterValue
IP degree of protectionIP65 standard IP67 with IP67 kit
Cooling methodNatural convection
Winding (copper hot) temperature248 °F (120 °C)

Product details

Overview

The BSH1403T21A2P is a 5-pole, three-phase servo motor in the Schneider Lexium 32 range, delivering 27.8 N.m of nominal torque at 4800 rpm and a peak current of 72 A from the LXM32.D72N4 drive. It carries a single-turn SinCos Hiperface encoder resolving 131072 points per turn, is sealed to IP65 standard, and ships without a holding brake — rotor inertia sits at 17.94 kg.cm².

Compared to the BSH1403T21F2P, the BSH1403T21A2P omits the holding brake (0.0 kg.cm² of brake vs 5.5 kg.cm²), reducing total inertia by 5.5 kg.cm² — a meaningful difference for applications requiring rapid acceleration or deceleration without a brake.

Integration

The motor is matched to the LXM32.D72N4 drive on a 400 V or 480 V three-phase supply; power output is 4100 W at both voltages. Rotatable right-angled connectors simplify cable routing in tight cabinets.

MPN
BSH1403T21A2P