Skip to main content
Log in
Schneider Electric C11N6TM080L — Miniature Circuit Breakers (MCB)

Schneider C11N6TM080L ComPacT NSXm 80A 4P Circuit Breaker, 5

MPNC11N6TM080L
Active

Schneider Electric ComPacT NSXm, 80 A, 4P, thermal-magnetic trip, 50 kA at 415 V AC, EN/IEC 60947-2.

$268.11Ref. price · indicative, final on quote
Schneider Electric C11N6TM080L datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

C11N6TM080L — Identification
ParameterValue
Product nameComPacT NSXm
Product rangeComPacT
Product/component typeCircuit breaker
Device applicationDistribution
C11N6TM080L — Ratings
ParameterValue
Rated current (In)80 A at 40 °C
Poles configuration4P
Rated operational voltage (Ue)440 V AC 50/60 Hz
Rated insulation voltage (Ui)800 V AC 50/60 Hz
Rated impulse withstand voltage (Uimp)8 kV
Network type (AC/DC)AC
Network frequency50/60 Hz
Utilisation categoryCategory A
Overvoltage categoryIII
C11N6TM080L — Protection
ParameterValue
Trip unit technologyThermal-magnetic
Earth-leakage protectionWithout
Suitability for isolationYes conforming to IEC 60947-2
Electrical durability (cycles)20000 cycles at 440 V In/2 10000 cycles at 440 V In
Mechanical durability (cycles)20000 cycles
C11N6TM080L — Mechanical
ParameterValue
Mounting supportBackplate
Control typeToggle
Local signalling/indicationFlag (green) for presence of auxiliary contacts
Number of 9 mm pitches12 module
C11N6TM080L — Environmental
ParameterValue
Operating ambient temperature-25...70 °C
Storage ambient temperature-50...85 °C
IP degree of protectionIP40 conforming to IEC 60529
Pollution degree3 conforming to IEC 60664-1
Relative humidity0...95 %
C11N6TM080L — Approvals
ParameterValue
StandardsEN/IEC 60947-2
C11N6TM080L — Electrical
ParameterValue
[Icu] rated ultimate short-circuit breaking capacity90 kA Icu at 220...240 V AC 50/60 Hz conforming to IEC 60947-2 50 kA Icu at 380...415 V AC 50/60 Hz conforming to IEC 60947-2 50 kA Icu at 440 V AC 50/60 Hz conforming to IEC 60947-2
[Ics] rated service short-circuit breaking capacity90 kA at 220...240 V AC 50/60 Hz conforming to IEC 60947-2 50 kA at 380...415 V AC 50/60 Hz conforming to IEC 60947-2 50 kA at 440 V AC 50/60 Hz conforming to IEC 60947-2
C11N6TM080L — Specifications
ParameterValue
[Ir] long-time protection pick-up adjustment range0.7...1 x In
Trip unit protection functionsLI

Product details

The 4P configuration (three phases plus switched neutral) suits it for three-phase distribution where the neutral must be protected or isolated alongside the phases. The thermal-magnetic trip curve (TM-D) provides overload protection via the thermal bimetal and short-circuit protection via the magnetic coil.

Deployment context

Mounts on a backplate via the 9-module pitch (12 modules wide at 9 mm each = 108 mm width). Front-connect terminals on both line and load sides — Everlink lugs accept 2.5 to 95 mm² rigid or stranded Al/Cu, or 2.5 to 70 mm² flexible copper. The 35 mm connection pitch with spreaders (27 mm without) matches standard DIN-rail terminal spacing for panel wiring. Suitability for isolation is certified per IEC 60947-2, so the breaker can serve as a disconnecting means for the downstream circuit. The toggle control and green flag indicator for auxiliary-contact presence give visual status without opening the panel door.

Frequently asked questions

Where can I buy C11N6TM080L and how is it quoted?

It is sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time.

What is the breaking capacity of this breaker?

The N-level breaking capacity is 50 kA at 415 V AC, which covers most commercial and light industrial fault-current scenarios.

What compliance documentation does this breaker carry?

It is certified to EN/IEC 60947-2 and carries IEC 60664-1 pollution degree 3. The IP40 and IK07 ratings are per IEC 60529 and IEC 62262 respectively.

MPN
C11N6TM080L