Skip to main content
Log in
Schneider Electric C60H1P20AD — 1-Pole MCB (DIN Rail)

Schneider Electric C60H1P20AD MCB, D Curve, 20 A, 1P, Multi9

MPNC60H1P20AD
Obsolete

Schneider Electric Multi9 C60H C60H1P20AD, miniature circuit breaker, D curve, 20 A, 1 pole, 15 kA breaking capacity at 230 V AC, thermal-magnetic trip unit.

Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

C60H1P20AD — Identification
ParameterValue
Product nameC60
Product / component typeMiniature circuit-breaker
Product rangeMulti9
Device short nameC60H
Poles description1P
Number of protected poles1
Device applicationDistribution
C60H1P20AD — Electrical & Protection
ParameterValue
Rated current (In)20 A at 40 °C
Rated operational voltage (Ue)440 V AC 50/60 Hz
Tripping curve codeD
Magnetic tripping limit10...14 x In
Breaking capacity (Icu / AIR)15 kA Icu at 230...240 V AC 50/60 Hz conforming to IEC 60947-2 20 kA Icu at 60 V DC 1P conforming to IEC 60947-2 30 kA Icu at 130 V AC 50/60 Hz conforming to IEC 60947-2 4 kA Icu at 400...415 V AC 50/60 Hz conforming to IEC 60947-2
Network type (AC/DC)AC
Network frequency50/60 Hz
Trip unit technologyThermal-magnetic
Control / actuation typeToggle
Mechanical durability (cycles)20000 cycles
C60H1P20AD — Mounting & Connection
ParameterValue
Terminal connections / wire rangeTunnel type terminals16 mm² flexible Tunnel type terminals25 mm² rigid
Mounting support35 mm symmetrical DIN rail
Mounting modeFixed
Width18 mm
Height81 mm
Depth73 mm
Tightening torque (by circuit)2 N.m
C60H1P20AD — Environmental
ParameterValue
Operating ambient temperature-25...60 °C
Storage ambient temperature-40...70 °C
C60H1P20AD — Electrical
ParameterValue
[Ui] rated insulation voltage500 V AC 50/60 Hz conforming to IEC 60947-2
[Uimp] rated impulse withstand voltage6 kV conforming to IEC 60947-2

Product details

The C60H1P20AD is a 1-pole miniature circuit breaker from the Multi9 C60H series, rated 20 A at 40 °C with a D tripping curve. The 15 kA breaking capacity at 230–240 V AC (Icu per IEC 60947-2) tells you it can safely interrupt a fault up to that level without welding the contacts or cascading upstream.

The 18 mm width (2 × 9 mm pitches) means it occupies a single modular slot in a standard distribution board — no special adapter needed. Tunnel-type terminals accept up to 25 mm² rigid or 16 mm² flexible conductors; tighten to 2 N·m. The toggle actuator gives local ON/OFF indication and a contact position indicator confirms isolation status per IEC 60947-2.

Frequently asked questions

Where can I buy C60H1P20AD and what is the lead time?

The C60H1P20AD is sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time.

What is the closest alternative to C60H1P20AD in the Multi9 family?

Within the same C60H series, the main alternative is a different curve or rating — for example, a C60H with a C curve (magnetic trip 5–10 × In) for general-purpose distribution, or a higher/lower amp rating. The D curve here is specific to high-inrush loads; swapping to a C curve risks nuisance trips on motor or transformer startup. There is no pin-compatible alternate with identical electrical ratings and curve.

What compliance documentation does Schneider provide for C60H1P20AD?

The breaker carries IEC 60947-2 certification (breaking capacity, isolation suitability, limitation class 3). It also conforms to IEC 60068-1 for tropicalisation (damp heat). RoHS and REACH declarations are standard for the Multi9 range; specific certificates are available on request.

MPN
C60H1P20AD