What this MCB does on the panel
The Schneider Electric C60H2P6AC is a 1P+N miniature circuit breaker from the Multi9 C60H series, rated 6 A with a C-curve trip characteristic. It protects a single phase and its neutral on a 230/400 V AC distribution board, with a 10 kA interrupting capacity at 440 V AC per IEC 60947-2 — enough for most commercial and light industrial sub-distribution panels where the fault current stays under that ceiling.
Neutral is on the left, which matters when you're laying out busbars or pre-wired assemblies. The toggle gives positive ON/OFF indication and a contact position indicator confirms the state even if the handle is forced.
The C60H2P6AC carries a 30 kA Icu at 230...240 V AC and 15 kA at 400...415 V AC, so it coordinates well with an upstream 63 A or 100 A molded-case breaker in a typical 2-level distribution scheme. The 10 kA at 440 V AC is the worst-case rating for a 3-phase line-to-line fault on a 400 V system. Limitation class 3 per IEC 60947-2 means it lets through less energy than a class-2 breaker — useful for protecting downstream equipment and reducing arc-flash energy at the panel.