The Schneider Electric C60HD206 is a 2-pole miniature circuit breaker from the Multi9 C60H range, rated at 6 A with a D tripping curve and thermal-magnetic trip unit. It's a distribution-grade MCB — the D curve means it's built for loads with high inrush current, like small motors or transformers, where the magnetic trip kicks in at 10 to 14 times the rated current to avoid nuisance trips on startup.
This part is officially obsolete per the manufacturer. If you've got this on a BOM for a panel that's already in the field, you're looking at the surplus or broker channel to source it. No direct factory replacement is listed — the C60H family has been superseded by newer ranges (like the Acti9 iC60 series), but pin-compatibility and footprint should be verified against the specific mounting and busbar arrangement in your existing panel.
Rated breaking capacity hits 10 kA Icu at 440 V AC per EN/IEC 60947-2, and 15 kA at 400–415 V AC — enough for most commercial and light industrial distribution boards. The 2-pole format protects both phase and neutral on a single-phase line, or two phases on a three-phase system where you need independent overcurrent protection per pole. Mounts on standard DIN rail, same as any Multi9 device, so it swaps into an existing C60H panel without re-drilling or re-bussing.