24 VDC coil, 3NO-2NC — the spare that covers the legacy panel
The CAD326BDS135 is a DC-operated control relay from the Schneider Electric TeSys family, built for 24 VDC control circuits. Its 3NO-2NC contact configuration gives you five poles — three normally open for switching loads on, two normally closed for status or interlock signals. Rated 10 A at 600 VAC and 2.5 A at 600 VDC, so the DC current derating is real — if you're switching a DC solenoid or brake, budget for the 2.5 A ceiling per pole, not the AC figure.
DIN rail fit, finger-safe enclosure, and the standards it meets
IP2X enclosure means finger-safe but not sealed; keep it in a clean cabinet, not a washdown zone. Approved to UL, CSA, CE and meets IEC 60947-5-1, EN 60947-5, BS 4794, VDE 0660 — accepted in both North American and European control panels for industrial control circuits. Operating temperature range -40 to 158 °F — works in unheated enclosures or outdoor cabinets as long as condensation is managed.
Current production — one for the cabinet, one for the shelf
For a maintenance-spares buyer, this is the kind of part to keep one in the cabinet before it fails. The 24 VDC coil and 3NO-2NC layout are common across older and current TeSys panels, so it backs up multiple installs.