BOM / RFQ

Schneider Electric CAD506FD — Motor Control Accessories

CAD506FD Schneider TeSys Deca Control Relay, 5NO, 110VDC

MPNCAD506FD

Obsolete

Schneider TeSys Deca CAD506FD control relay, 5 NO contacts, 110 VDC standard coil, lugs-ring terminals, EN/IEC 60947-5-1, UL, CSA, CCC, IP2X front face.

$147.74Ref. price · indicative, final on quote

Add to RFQ

Schneider Electric CAD506FD datasheet (PDF)

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

CAD506FD — Identification
Parameter	Value
Product / component type	Control relay
Product range	TeSys TeSys Deca

CAD506FD — Electrical
Parameter	Value
Rated operational voltage (Ue)	10 MOhm
Pole / contact composition	5 NO

CAD506FD — Mechanical
Parameter	Value
Width	1.8 in (45 mm)
Height	3.03 in (77 mm)
Depth	3.7 in (93 mm)

CAD506FD — Environmental
Parameter	Value
IP protection rating	IP2X front face VDE 0106
Operating ambient temperature	-40...140 °F (-40...60 °C) 140...158 °F (60...70 °C) with derating
Storage ambient temperature	-76...176 °F (-60...80 °C)
Operating altitude	0...9842.52 ft (0...3000 m)

CAD506FD — Approvals
Parameter	Value
Conformance standards	EN/IEC 60947-5-1 GB/T 14048.5 UL 60947-5-1 CSA C22.2 No 60947-5-1 JIS C8201-5-1

Product details

Overview

The CAD506FD is a Schneider TeSys Deca control relay with 5 normally-open (NO) contacts, rated for control circuits up to 690 V. It uses a 110 VDC standard coil and terminates via lugs-ring terminals. The relay carries certifications to EN/IEC 60947-5-1, UL 60947-5-1, CSA C22.2 No 60947-5-1, GB/T 14048.5, and JIS C8201-5-1, with an IP2X front face per VDE 0106.

The five NO contacts switch control loads in AC-14, AC-15, and DC-13 utilization categories — covering solenoid valves, contactor coils, and small motor starters. The IP2X front face provides finger-safe protection inside the panel.

Applications

This relay is used in motor control centers, conveyor systems, and packaging lines where multiple independent control signals must be switched from a single coil. It fits within the TeSys Deca range alongside contactors and overload relays.