The Schneider CAD50AMD is a TeSys Deca control relay with five normally open (5NO) pole contacts, designed for switching control circuits up to 690V. It uses a 220V DC standard coil and terminates via snap-in terminals for quick panel wiring.
Rated for utilisation categories AC-15, AC-14, and DC-13 per EN/IEC 60947-5-1. AC-15 covers solenoid valve and electromagnetic clutch loads (high inrush); AC-14 covers small electromagnetic loads below 72 VA; DC-13 covers DC solenoids and contactors. This means the relay is built for inductive control loads, not resistive heating elements. The 5NO contact configuration gives you five independent normally-open poles in a single 45 mm wide package — useful for distributed control signals or interlocking multiple contactors from one command. Storage range extends to -60 to 80 °C. The TH protective treatment per IEC 60068 means it handles tropical humidity environments without corrosion issues.
Snap-in terminals mount directly onto DIN rail or panel baseplate. The 45 mm width and 93 mm depth fit standard TeSys Deca footprint alongside contactors and overload relays in a motor control centre layout. IP2X front-face protection per VDE 0106 means basic finger-safe touch protection on the front panel.