The CAE22R6 is a control relay from Schneider Electric's Easy TeSys range, built for switching control circuits in industrial panels. It carries 2 normally-open and 2 normally-closed contacts — enough for a small motor starter interlock or a valve position feedback chain. Rated operational voltage goes up to 690 V, with a 440 V AC coil. The utilisation category is AC-14 and AC-15, which covers electromagnetic loads like contactor coils and solenoid valves — the inductive inrush these present is what the AC-15 rating is designed to handle. GB/T 14048.1 and GB/T 14048.5 cover the Chinese GB equivalent — relevant if the panel is destined for a China-based line or needs CCC-level documentation.
If you are freezing a BOM for a new panel design, this part should be replaced with a current-production equivalent. The Easy TeSys range has active successors; the contact configuration (2NO+2NC) and coil voltage (440 V AC) are the parameters to match. A parametric cross-reference against the current Easy TeSys catalogue is the next step — the panel footprint and wiring scheme should carry over with minimal rework.
The relay measures 45 mm wide, 74 mm high, and 80 mm deep — a standard compact footprint that clips onto a DIN rail inside the control panel. The grey (RAL 7011) housing is typical for Schneider control relays and matches the rest of the Easy TeSys line. The TH protective treatment per IEC 60068 adds resistance to humid, tropical environments, which is useful for non-conditioned panel rooms.