Skip to main content
Schneider Electric CAE40Q6 — Motor Protection Circuit Breakers (MPCB)

Schneider Electric CAE40Q6 Easy TeSys Control Relay, 4NO, 38

MPNCAE40Q6
Obsolete

Schneider Electric Easy TeSys Control Relay, CAE40Q6, 4 NO, ≤690 V, 380 V AC coil, AC-15/AC-14 utilisation category.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

CAE40Q6 — Mechanical
ParameterValue
Height74 mm
Width45 mm
Depth80 mm

Product details

The 380 V AC coil matches common European line voltages. It is listed as obsolete, so any sourcing runs through the surplus or broker channel — same genuine part, different passport.

The AC-15 and AC-14 utilisation categories tell you this relay is built for switching electromagnetic loads — contactors, solenoid valves, and similar inductive control circuits — not resistive heaters. AC-15 covers solenoid loads above 72 VA; AC-14 covers smaller solenoids below 72 VA. The 4 NO configuration gives you four independent make contacts, each rated for the same duty. The 380 V AC coil is a specific voltage.

Frequently asked questions

What are the key ratings of the CAE40Q6?

It is a 4 NO control relay with a 380 V AC coil, rated for AC-15 and AC-14 utilisation categories up to 690 V. Operating temperature range is -20 to 70 °C, with IP2X finger protection.

What standards does the CAE40Q6 comply with?

It complies with EN/IEC 60947-1, EN/IEC 60947-5-1, GB/T 14048.1, and GB/T 14048.5. It also carries TH protective treatment per IEC 60068 for tropical environments.

How do I source the CAE40Q6 now that it is obsolete?

Sourcing is through surplus inventory or broker channels. We can quote to order against an RFQ; availability and lead time depend on what the channel holds at the time of request.

MPN
CAE40Q6