Schneider Electric Domae series, DOM11231SNI miniature circuit breaker, 2-pole, 10 A rated current, C curve, 4.5 kA breaking capacity at 230 V AC, 50 Hz.
| Parameter | Value |
|---|---|
| Series / family | Domae |
| Product / component type | Miniature circuit-breaker |
| Device application | Distribution |
| Parameter | Value |
|---|---|
| Rated current [In] | 10 A |
| Number of protected poles | 2 |
| Pole configuration | 2P |
| Rated operational voltage [Ue] | 220...240 V AC 50 Hz |
| Network type (AC/DC) | AC |
| Network frequency | 50 Hz |
| Parameter | Value |
|---|---|
| Tripping curve code | C |
| Breaking capacity (Icu) | 4500 A at 230 V AC 50 Hz conforming to IEC 60898-1 |
| Operating / control type | Toggle |
| Parameter | Value |
|---|---|
| 9 mm pitches | 4 |
| Mounting support | DIN rail |
| Mounting mode | Clip-on |
| Comb busbar / distribution block compatibility | YES |
| Parameter | Value |
|---|---|
| Standards / compliance | SNI 04-6507.1 IEC 60898-1 |
The Schneider Electric DOM11231SNI is a Domae-series miniature circuit breaker (MCB) with 2 protected poles, rated 10 A continuous current on a C curve, and a breaking capacity of 4500 A at 230 V AC 50 Hz per IEC 60898-1.
Clip-on mounting to a standard DIN rail, 2-pole width at 9 mm per pitch (4 pitches total). The toggle control and grey housing are standard Domae-series form factor. Comb busbar and distribution block compatible, per the spec.
DOM11231SNI is sourced to order against an RFQ through independent distribution channels. Availability and current pricing are confirmed at quote time.
No official successor order code is listed for this obsolete part. A form-fit-function replacement would need to match the 2-pole, 10 A, C-curve, 4.5 kA breaking capacity, and DIN-rail mounting — but no pin-compatible alternative is documented in the available record.
DOM11231SNI complies with SNI 04-6507.1 and IEC 60898-1 standards for miniature circuit breakers.
No related articles