Skip to main content
Log in
Schneider Electric DOM11375 — 1-Pole MCB (DIN Rail)

Schneider Electric DOM11375 Domae MCB 1P 6A C Curve 6kA

MPNDOM11375
Obsolete

Schneider Electric Domae series, miniature circuit breaker 1P, 6A, C curve, 6 kA breaking capacity at 230/400 V AC, order code DOM11375.

Schneider Electric DOM11375 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

DOM11375 — Identification
ParameterValue
Product / component typeMiniature circuit-breaker
Product rangeDomae
Device short nameDomae MCB
Poles description1P
Number of protected poles1
Device applicationDistribution
DOM11375 — Electrical & Protection
ParameterValue
Rated current (In)6 A
Rated operational voltage (Ue)230/400 V AC 50/60 Hz
Tripping curve codeC
Breaking capacity (Icu / AIR)6000 A at 230/400 V AC 50/60 Hz conforming to IEC 60898-1
Network type (AC/DC)AC
Network frequency50/60 Hz
Control / actuation typeToggle
Mechanical durability (cycles)10000 cycles
DOM11375 — Mounting & Connection
ParameterValue
Terminal connections / wire rangeTunnel type terminals1...25 mm² rigid Tunnel type terminals1...16 mm² flexible
Mounting supportDIN rail
Mounting modeClip-on
Width18 mm
Height81 mm
Depth78.5 mm
Tightening torque (by circuit)2 N.m
DOM11375 — Environmental
ParameterValue
Operating ambient temperature-25...60 °C
Storage ambient temperature-40...70 °C
IP degree of protectionIP20 conforming to IEC 60529
DOM11375 — Approvals
ParameterValue
Conformity standardsSNI 04-6507.1 IEC 60898-1

Product details

It breaks 6000 A at 230/400 V AC 50/60 Hz per IEC 60898-1, which means it handles standard residential and light commercial fault levels without cascading upstream.

This part is marked Obsolete by the manufacturer. If you are freezing a new design, look at the current Domae active catalog for a 1P 6A C-curve MCB; the form factor (18 mm width, clip-on DIN rail) is standard across the range, so panel layout should carry over.

Mounts on DIN rail via the clip-on mechanism — 18 mm wide (one modular unit), 81 mm tall, 78.5 mm deep. Tunnel terminals accept 1–25 mm² rigid or 1–16 mm² flexible wire; tighten to 2 N·m. IP20 finger-safe front. Electrical endurance is 20,000 cycles at rated load; mechanical endurance 10,000 cycles.

Frequently asked questions

Where can I buy DOM11375?

DOM11375 is sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time — submit an RFQ for a firm position.

What is the breaking capacity of DOM11375?

6000 A at 230/400 V AC 50/60 Hz, conforming to IEC 60898-1. That is the standard 6 kA rating for domestic and light commercial MCBs — adequate for most final distribution circuits where the prospective short-circuit current stays under that level.

What does the C curve mean on this MCB?

The C curve trips between 5 and 10 times the rated current (30–60 A for this 6 A breaker). It is the standard choice for general-purpose distribution — lighting, socket outlets, small motor circuits — where inrush is moderate. For purely resistive loads or longer cable runs, a B curve may be preferred; for high-inrush loads like large transformers, a D curve.

What compliance documentation does Schneider provide for DOM11375?

The part is certified to SNI 04-6507.1 and IEC 60898-1. The evidence does not list RoHS, REACH, or UL documentation specifically for this order code. Compliance documentation can be requested at quote time.

MPN
DOM11375