Schneider Electric DPE65G7 Easy TeSys Contactor, 65A, 3P, 40

The Schneider Electric DPE65G7 is an Easy TeSys DPE IEC contactor, nonreversing, with 3 normally-open power poles rated for 65 A in AC-1 duty and AC-3 motor switching. It carries motor power ratings across common North American voltages: 40 hp at 460/480 V AC three-phase, 15 hp at 230/240 V AC three-phase, and 7.5 hp at 230/240 V AC single-phase, all conforming to UL and CSA. The coil is 120 V AC 60 Hz. The 65 A AC-3 rating means it can switch a motor drawing up to 65 A during start — typical for a 40 hp motor at 480 V three-phase. Mounts on a rail plate — standard panel integration for control cabinets. Screw terminals on both power and control circuits accept flexible or solid copper up to 25 mm² on the main power path, with a tightening torque of 62 lbf·in (7 N·m) for the larger conductor range. Compliance covers IEC 60947-4-1, EN 60947-4-1, UL 60947-4-1, and CSA C22.2 No 14 — the key standards for contactors in industrial motor control. Flame resistance is V1 per UL 94. Rated insulation voltage (Ui) is 690 V for the power circuit per IEC 60947-4-1.